Home+ Air & Heat

    Thermostats, water heaters and more on Long Island

    Thermostat upgrades, water-heater service, condenser cleaning and HVAC accessories across Nassau, Suffolk, Queens and NYC. Review your options with Home+.

    Nassau · Suffolk · Queens & NYC

    Call (516) 259-1191
    5.0 / 5 · 120 Google reviewsWritten options before work

    Start with the work you need

    Pick what you need

    Thermostat replacement

    Confirm equipment, wiring and control compatibility before replacing a thermostat. The work includes an equipment-specific setup and operational check, not a universal hardware price.

    View thermostat replacement

    Smart thermostat installation

    Review system compatibility, power requirements, Wi-Fi and household preferences. Programming and app setup should fit the equipment rather than overriding its required operating controls.

    View smart thermostat installation

    Condenser cleaning

    Outdoor-coil cleaning depends on the equipment, condition and safe access. A cooling failure needs diagnosis; cleaning alone is not a guaranteed repair for warm air or electrical faults.

    View condenser cleaning

    Water heater flush

    Tank and tankless equipment require different maintenance. Review age, condition, water quality and manufacturer instructions before deciding which flush or service scope is appropriate.

    View water heater flush

    Water heater installation

    Compare hot-water demand, tank or tankless operation, fuel, power and venting. Installation space and connected plumbing affect the equipment selection and written project scope.

    View water heater installation

    Mini-split installation

    Ductless heating and cooling can suit additions or homes without useful ducts. Zone count, piping, drains, power and indoor-unit locations determine the installation.

    View mini-split installation

    UV light installation

    Review the specific coil or airstream application and manufacturer installation requirements. Equipment compatibility, lamp shielding, maintenance and product limitations need to be understood.

    View uv light installation

    Air scrubber installation

    Compare the product’s intended purpose and limitations with the home’s concern and system airflow. An accessory is not a medical treatment or a guaranteed cure for every pollutant.

    View air scrubber installation

    Humidity control

    Consider the building’s moisture conditions, controls and distribution before adding humidity equipment. Water supply, condensate disposal and maintenance need to match the selected product.

    View humidity control

    A clear starting point

    Compare the type of visit or installation before deciding. These are planning figures, not a quote. Equipment, access, electrical work, distribution and the approved scope determine your written price.

    Residential diagnostic
    $199

    Free for all Home+ members. Non-member diagnostic credited toward an approved repair.

    Mini-split installation
    Starts from $3,500
    Water heater installation
    Starts from $2,000, up to $7,000

    Equipment-specific work is priced at the visit

    Filtration, UV, ventilation, humidity controls, thermostat compatibility and cleaning scopes need an equipment review. We do not quote a universal accessory price or a free laboratory test. Review the written scope and price before approving work.

    Small upgrades still need the right equipment match

    A thermostat, cleaning visit or accessory can affect the wider heating and cooling system. Start with the existing make, model, controls and concern, then compare what work is actually needed. A universal installation price can miss wiring, access, drainage or compatibility requirements that determine the final scope.

    Home+ reviews thermostat replacement, smart controls, condenser cleaning, water-heater maintenance and suitable HVAC accessories. The work is explained and priced before authorization. Report any active fault so a maintenance or accessory request is not used instead of necessary diagnosis.

    Installation quality matters even for a relatively small project. Confirm equipment compatibility, operating settings, safe access, manufacturer requirements and the checks performed afterward. No same-day completion is promised; appointment availability and any required parts are confirmed for the request.

    Thermostats and smart controls

    Thermostat replacement starts with the equipment and wiring. Heat pumps, multi-stage systems, boiler zones and conventional furnaces may need different controls. A smart thermostat may need a common wire or a manufacturer-approved power arrangement. Do not choose solely by app features or appearance.

    A suitable installation includes the necessary control setup and operational check. Scheduling, recovery and remote access should fit the heating or cooling equipment and household. An app cannot fix undersized ducts, a failed blower or an incorrect boiler zone arrangement; an underlying fault needs diagnosis.

    If the thermostat loses power, displays errors or fails to control the system, the thermostat itself may not be the only cause. Wiring, power supply, controls and the connected equipment should be evaluated. Do not short wires or open energized equipment to test a guessed replacement.

    Water-heater maintenance and replacement

    A water-heater flush or tankless descaling visit should match the equipment and manufacturer requirements. Age, condition, water quality, valves, drainage and access affect whether work is appropriate. Maintenance is not a guaranteed fix for a leaking tank or a failed heating component.

    Replacement planning starts with household hot-water demand, the fuel or electrical supply and available space. Tank, tankless and heat-pump water heaters have different venting, power, airflow and drainage requirements. Review what plumbing, electrical and disposal work is included in the written quote.

    A heat-pump water heater is different from a space-heating heat pump and has its own utility program. Confirm eligible equipment and the redemption process before purchase. If there is a gas odor, a CO alarm or unsafe water near electrical equipment, address the immediate danger before arranging ordinary maintenance.

    Condenser cleaning and equipment-specific maintenance

    Outdoor equipment can collect leaves, surface debris and coil contamination. Cleaning needs a method suited to the coil and equipment condition, with safe electrical isolation and access. Review which units and surfaces are included and whether additional work needs separate authorization.

    An AC that is not cooling, freezes or repeatedly trips a breaker needs diagnosis rather than assuming cleaning is the repair. Refrigerant, controls and electrical components may require separate evaluation. Do not open electrical covers or use an unsuitable cleaning method on the coil.

    After authorized maintenance, the technician explains findings and any recommended follow-up. Equipment condition, access and system count determine scope and price. Compare the relevant AC maintenance and repair pages if the request involves more than an accessible outdoor-coil service.

    Accessories and humidity equipment

    UV, air-scrubber and humidity-control products need a defined purpose and equipment review. Compare product information, airflow, controls and installation conditions, including maintenance and replacement needs. Performance varies by application; no universal health or germ-removal result is promised.

    A humidifier needs appropriate water supply, drainage and seasonal settings. A dehumidifier needs capacity and a condensate route, while moisture sources such as leaks may require other work. Discuss the building conditions rather than assuming an accessory fixes every comfort complaint.

    For all accessory work, review the proposed scope, limitations, price and applicable warranty terms. These services are priced at the visit unless a verified written quote is supplied. The technician should explain operating checks and homeowner maintenance before the job is considered complete.

    Controls, comfort and realistic savings

    A thermostat that makes equipment short-cycle or calls for the wrong operating stage should not be dismissed as a minor inconvenience. Incorrect wiring, settings or compatibility can interfere with performance. The control and connected equipment need to be evaluated together; do not assume replacing the wall display resolves every problem.

    A programmable or smart control can make a suitable schedule easier to manage, but savings depend on the existing habits, equipment, climate and building. Do not expect a guaranteed percentage or a device to correct duct losses. Review settings and operating behavior after installation so the controls support the system’s intended strategy.

    Water-heater and thermostat requests can be planned together with other work only when the scope, equipment and available time are confirmed. Tell the office about each system before selecting a visit. An accessory installation, a maintenance task and a broken system may require different equipment reviews or separate authorized work.

    Keep the model information, configuration and maintenance instructions for the products installed. Ask how to operate them, when to replace consumables and which symptoms warrant service. Warranty coverage depends on the product and written installation terms rather than a blanket promise that every accessory has identical coverage.

    Local homes. Different systems.

    Nassau County

    Cape-style and split-level homes often mix older boilers, radiators or baseboard with separately added central AC. A ducted replacement needs an airflow review; boiler-heated additions may be better suited to a correctly sized ductless system. PSEG Long Island supplies electricity; check your bill before using a utility rebate.

    Suffolk County

    Oil-fired hydronic systems, larger homes and later additions can require careful zoning and distribution planning. Compare repair or maintenance with a heat-pump upgrade using a heating load calculation—not a fuel-conversion sales shortcut. Access, electrical capacity and existing controls matter throughout Suffolk.

    Find your Suffolk community

    Queens & NYC

    Attached homes, apartments and older steam systems have different access, noise and equipment-placement constraints. Building or owner approval may be required. Con Edison serves many NYC addresses, but the Rockaways use PSEG Long Island electricity. Call with the exact address and system before selecting a visit.

    Confirm address coverage

    Recent work

    Work in homes like yours

    Recent published projects with real equipment photos and the work performed.

    See all jobs
    Reassembled and clean: the same condenser, with its mildew-free top and cabinet.Repair

    North Bellmore, NY·Central AC

    No-Cool AC Repair: Failed Capacitor Replaced in North Bellmore

    See the job

    Close-up of the new float safety switch on the trap, wired to shut the system off if water backs up.Repair

    Carle Place, NY·Central AC

    Attic Air Handler Overflow Protection & AC Tune-Up in Carle Place

    See the job

    The original control board, its display reading "StA" (status). The boiler was sitting in standby and not running.Repair

    Levittown, NY·Gas boiler

    Boiler Control Board & Low-Water Cut-Off Repair in Levittown

    See the job

    Photos enhanced for clarity.

    Blake Ruwali, owner of Home+ Air and Heat

    Owner

    Blake Ruwali

    Blake runs Home+ from our office in Jericho.

    NYC DCWP Home Improvement Contractor Lic. #2138487-DCWP

    Comfort, beyond one visit

    Home+ Comfort is $11.99/mo, paid up front as $143.88 for Year 1. From year two, choose $29/month or $299/year under the plan terms. All member diagnostics are free; review included maintenance, repair discounts and system terms before enrolling.

    Compare Home+ plans

    Plan equal payments

    For a planned replacement, compare the written project price with available equal-payment financing. Financing is subject to credit approval. Review current plans, APRs, terms, and qualification details on the financing page; offers may change.

    View financing terms

    Questions before your visit

    Which areas does Home+ serve?

    Home+ serves Nassau County, Suffolk County, Queens and NYC. Share the exact address, property type and equipment when calling. Dispatch confirms service coverage, access requirements and the current appointment window; a county name alone does not establish that every equipment type can be serviced at every building.

    How much is a diagnostic visit?

    The standard residential diagnostic is $199 for non-members and is credited toward an approved repair. Diagnostics are free for all Home+ membership plans. Repair work, parts and equipment are separate from the diagnostic; review the findings and proposed written price before authorizing additional work.

    Are appointment times or first-visit repairs guaranteed?

    No fixed arrival or completion time is promised. Dispatch confirms the current window after checking technician availability, the address, equipment, traffic, weather and demand. A repair may need a part, safe access or another visit. Ask what is included, what remains to be confirmed and how follow-up work will be scheduled.

    Do I need a membership to request service?

    No. Homeowners can request a diagnostic, maintenance or installation estimate without joining. Comfort is $11.99/mo, paid up front as $143.88 for Year 1, with $29/month or $299/year from year two under the membership terms. Compare included tune-ups, free diagnostics and repair discounts with your needs before enrolling.

    Can I finance a replacement?

    Financing is available subject to credit approval and the selected plan. Compare the complete installation scope and written price first, then review current plans, APRs, equal-payment terms and qualification details on the financing page. Do not assume a sample monthly figure applies to your project or that an advertised financing plan automatically qualifies.

    What should I prepare before the visit?

    Have the service address, equipment make and model if accessible, approximate age, symptoms, maintenance history and any error code ready. Note whether the problem affects one room or the whole home. Provide safe access to the equipment and discuss building or landlord requirements. Do not remove energized covers, open refrigerant circuits or adjust fuel-burning components.

    Do you install smart thermostats?

    Yes, where the control is compatible with the equipment and wiring. Share the system type and thermostat model, if known. Power, staging, heat-pump controls and zones must be checked before installation and setup. The final scope is priced after the equipment review.

    What are the benefits of a smart thermostat?

    Compatible controls can provide scheduling, remote access and useful equipment information. Results depend on the home, settings and system. No fixed energy-saving percentage is promised, and a thermostat does not correct every airflow or equipment fault.

    Can I install a thermostat myself?

    Incorrect wiring or controls can cause equipment problems. A thermostat must match the system and use the appropriate power and configuration. Do not open energized equipment or short control wires. If compatibility is unclear, have the system and installation reviewed professionally.

    What is a C-wire and do I need one?

    A common wire supplies a return path for power used by many smart controls. Requirements vary by thermostat and equipment. Confirm the manufacturer’s supported wiring or power arrangement rather than assuming every control works with the existing wires.

    Which smart thermostat do you recommend?

    Choose a control that matches the system type, stages, zones, power requirements and desired scheduling. App preference matters, but compatibility comes first. Review supported equipment and installation settings before selecting a model.

    What size water heater do I need?

    Consider household hot-water demand, simultaneous use, recovery performance, available fuel or power and installation space. Tank and tankless systems are sized differently. Compare the equipment specification and project scope rather than choosing only by the number of people in the home.

    How long do water heaters last?

    Service life varies with equipment type, water quality, maintenance, use and installation. Leaks, corrosion, unreliable output and repeated repairs justify an assessment. A leaking tank is not repaired by a routine flush; compare the specific condition and a replacement quote.

    How do I know whether the thermostat needs replacement?

    Power loss, errors, inaccurate readings or a failure to control equipment can involve wiring or the connected system as well as the thermostat. Diagnosis should identify the cause. Replacing the wall control without evaluating the fault may leave the problem unchanged.

    What are the water-heater and mini-split starting prices?

    This category guide starts from $2,000, up to $7,000, for water-heater installation and starts from $3,500 for mini-splits. Equipment, fuel or power, access and project scope determine the written quote. Accessory work is priced at the visit.

    Let’s find the right next step

    Share your address, equipment and symptoms. We confirm appointment windows and emergency ETAs by phone; timing depends on technician availability, location, traffic, and weather. Diagnosis and parts determine repair completion.

    Call (516) 259-1191
    Call now