Share
    Back to Peerless Boilers
    Peerless logo
    Value

    Peerless Purefire PF-50-210

    Model Number: PF-50 through PF-399 (family)

    Residential PureFire is a gas-fired stainless-steel condensing hot-water boiler.

    95% AFUE
    Condensing Boiler
    16k - 210k BTU
    Program eligibility requires written confirmation
    (516) 259-1191

    Technical Specifications

    Efficiency (AFUE)95%
    Boiler TypeCondensing Boiler
    BTU Input Range16k - 210k BTU
    Fuelnatural gas/propane
    VentingPVC/CPVC/PP/SS
    Makes Domestic Hot Waterindirect-ready
    In ProductionYes
    Heat Exchanger Warranty12-year limited residential heat exchanger
    Installed Price

    Source: manufacturer spec sheet

    Prices depend on sizing, venting and piping in your home, so we quote every installation.

    Sizing: the right size comes from a room-by-room heat-loss calculation, not the size of the old boiler or a rule of thumb. Oversized boilers short-cycle and waste fuel; steam systems are sized to the connected radiation instead. See how we approach boiler installation.

    Home-Specific Operating Cost Review

    No guaranteed annual savings or payback period

    Historical Use

    Fuel consumption and weather

    Current Rates

    Utility and delivered-fuel prices

    System Design

    Load, piping, controls, and temperatures

    Get Your Custom Quote

    Full Specifications

    Model Number
    PF-50 through PF-399 (family)
    Efficiency (AFUE)
    95%
    Boiler Type
    Condensing Boiler
    Fuel
    natural gas/propane
    Venting
    PVC/CPVC/PP/SS
    BTU Input Range
    16k - 210k BTU
    Domestic Hot Water
    indirect-ready
    In Production
    Yes
    Parts Warranty
    Five-year parts if boiler is registered (one-year standard warranty)
    Heat Exchanger Warranty
    12-year limited residential heat exchanger

    Specifications sourced from the manufacturer spec sheet.

    Ideal For

    Homes replacing a gas hot-water boiler with a condensing unit

    Expert Review: Peerless Purefire PF-50-210

    Residential PureFire is a gas-fired stainless-steel condensing hot-water boiler.

    Peerless residential PureFire brochure spans PF-50 through PF-399; this page label covers an older subset 95.0–95.2% AFUE depending on model; five-year parts coverage requires registration Listed input range: 16–210 MBH input. Rated efficiency on file: 95% (confirm the rating method for the exact size on the spec sheet). Venting on file: PVC/CPVC/PP/SS. Can supply domestic hot water through an indirect tank.

    It is best suited to homes replacing a gas hot-water boiler with a condensing unit. Before ordering, a contractor should complete a room-by-room heat-loss calculation, check the distribution system's water temperatures and confirm venting and clearances against the installation manual.

    Pros: Condensing design captures heat from flue gases when return water is cool enough. Modulating burners can match output more closely to mild-weather loads. Can be paired with an indirect water heater for high-volume hot water. Multiple sizes (16–210 MBH input) allow sizing to a calculated heat loss. Considerations: Confirm the exact size, vent and condensate requirements; the family name is not a sizing calculation. Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings. Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials. Some details on this page still await manufacturer verification; check the spec sheet before relying on them.

    Specifications on this page come from the manufacturer documents linked below; always confirm figures for the exact size being installed.

    Key Features & Technology

    Peerless residential PureFire brochure spans PF-50 through PF-399; this page label covers an older subset

    95.0–95.2% AFUE depending on model; five-year parts coverage requires registration

    Listed input range: 16–210 MBH input.

    Rated efficiency on file: 95% (confirm the rating method for the exact size on the spec sheet).

    Venting on file: PVC/CPVC/PP/SS.

    Can supply domestic hot water through an indirect tank.

    Advantages

    • Condensing design captures heat from flue gases when return water is cool enough.
    • Modulating burners can match output more closely to mild-weather loads.
    • Can be paired with an indirect water heater for high-volume hot water.
    • Multiple sizes (16–210 MBH input) allow sizing to a calculated heat loss.

    Considerations

    • Confirm the exact size, vent and condensate requirements; the family name is not a sizing calculation.
    • Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings.
    • Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials.
    • Some details on this page still await manufacturer verification; check the spec sheet before relying on them.

    Sizing & Installation Notes

    Condensing boilers like the Purefire PF-50-210 reach their rated efficiency only when return water runs cool enough to condense flue gases. We check your radiation and design water temperatures so the unit actually condenses in your home, not just on the spec sheet.

    Every Peerless installation starts with a free in-home assessment covering the heat-loss calculation, venting and chimney condition, gas or oil supply sizing, and permit requirements for your town. Learn more about our boiler installation process, or see current rebate and incentive programs that may apply.

    Warranty & Protection

    Parts Warranty

    Five-year parts if boiler is registered (one-year standard warranty)

    Heat Exchanger

    12-year limited residential heat exchanger

    Our Guarantee

    100% Satisfaction

    All Peerless boiler installations by Home+ Air & Heat include our 1-year workmanship warranty, covering labor and any installation-related issues.

    Compare the Peerless Lineup

    Model Efficiency BTU Range Fuel Heat Exchanger Warranty
    Purefire PF-50-210 (this model) 95% AFUE 16k - 210k BTU natural gas/propane 12-year limited residential heat exchanger
    Series WBV/WV Not verified 84k - 273k BTU oil Ten-year limited steam or lifetime limited hot-water cast-iron sections (residential)
    Purefire PF-399-850 Not verified 80k - 1500k BTU natural gas/propane —
    Series 64 Not verified 345k - 633k BTU natural gas —
    Series 63 83% AFUE 89k - 288k BTU natural gas Ten-year limited residential steam cast-iron sections
    Series PBC Combi 95.3% AFUE 16k - 120k BTU natural gas/propane 12-year limited heat exchanger
    Series EC/ECT Not verified 105k - 420k BTU oil Ten-year limited steam or lifetime limited hot-water cast-iron sections (residential; confirm model certificate)

    See the full Peerless brand page for lineup context, or browse the Best Condensing Boilers guide to compare across brands.

    Frequently Asked Questions

    Ready for a Quote?

    Get a free, no-obligation quote for Peerless Purefire PF-50-210 installation in Nassau County.

    (516) 259-1191

    More Peerless Boilers

    Explore other boiler models from Peerless.

    View All Peerless Boilers

    Compare Boiler Brands

    See how Peerless compares to other top boiler manufacturers.

    Compare Alternatives

    Similar Boiler Models to Compare

    Other condensing boilers with similar efficiency ratings from different brands.

    Condensing
    High Eff.
    AFUE
    96.2%
    Tier
    mid-range
    View Details
    Condensing
    High Eff.
    AFUE
    96.1%
    Tier
    mid-range
    View Details
    Condensing
    High Eff.
    AFUE
    96%
    Tier
    flagship

    $5,000 - $8,500

    View Details
    Condensing
    High Eff.
    AFUE
    96%
    Tier
    premium

    $6,500 - $11,000

    View Details