
NTI Vmax110P/153P
Model Number: Vmax110P/153P
Vmax is a discontinued NTI condensing hot-water boiler family.
Technical Specifications
Source: manufacturer product data
Prices depend on sizing, venting and piping in your home, so we quote every installation.
Discontinued: No longer in production. If you already own one, we can still service it where parts are available. For a new install, compare current NTI Boilers models or every brand's lineup.
Sizing: the right size comes from a room-by-room heat-loss calculation, not the size of the old boiler or a rule of thumb. Oversized boilers short-cycle and waste fuel; steam systems are sized to the connected radiation instead. See how we approach boiler installation.
Home-Specific Operating Cost Review
No guaranteed annual savings or payback period
Historical Use
Fuel consumption and weather
Current Rates
Utility and delivered-fuel prices
System Design
Load, piping, controls, and temperatures
Full Specifications
- Model Number
- Vmax110P/153P
- Efficiency (AFUE)
- 95%
- Boiler Type
- Condensing Boiler
- Fuel
- natural gas/propane
- Venting
- PVC/CPVC/PP/SS
- BTU Input Range
- 20k - 153k BTU
- Domestic Hot Water
- yes
- In Production
- No — No longer in production
- Parts Warranty
- 1 year
- Heat Exchanger Warranty
- 12 years
Specifications sourced from the manufacturer product data.
Ideal For
Owners researching a Vmax replacement
Expert Review: NTI Vmax110P/153P
Vmax is a discontinued NTI condensing hot-water boiler family.
NTI lists a down-fired stainless fire-tube exchanger, integrated primary-loop pump, indirect-tank connections and 95% AFUE for VM110/VM153. Listed input range: 20–153 MBH input. Venting on file: PVC/CPVC/PP/SS. Warranty on file: heat exchanger 12 years; parts 1 year. Produces domestic hot water directly.
It is best suited to owners researching a Vmax replacement. Before ordering, a contractor should complete a room-by-room heat-loss calculation, check the distribution system's water temperatures and confirm venting and clearances against the installation manual.
Pros: Condensing design captures heat from flue gases when return water is cool enough. Modulating burners can match output more closely to mild-weather loads. Multiple sizes (20–153 MBH input) allow sizing to a calculated heat loss. Considerations: Check parts availability and model designation; the manufacturer labels the series discontinued. Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings. Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials. Some details on this page still await manufacturer verification; check the spec sheet before relying on them.
Key Features & Technology
NTI lists a down-fired stainless fire-tube exchanger, integrated primary-loop pump, indirect-tank connections and 95% AFUE for VM110/VM153.
Listed input range: 20–153 MBH input.
Venting on file: PVC/CPVC/PP/SS.
Warranty on file: heat exchanger 12 years; parts 1 year.
Produces domestic hot water directly.
Advantages
- Condensing design captures heat from flue gases when return water is cool enough.
- Modulating burners can match output more closely to mild-weather loads.
- Multiple sizes (20–153 MBH input) allow sizing to a calculated heat loss.
Considerations
- Check parts availability and model designation; the manufacturer labels the series discontinued.
- Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings.
- Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials.
- Some details on this page still await manufacturer verification; check the spec sheet before relying on them.
Sizing & Installation Notes
Condensing boilers like the Vmax110P/153P reach their rated efficiency only when return water runs cool enough to condense flue gases. We check your radiation and design water temperatures so the unit actually condenses in your home, not just on the spec sheet.
Every NTI Boilers installation starts with a free in-home assessment covering the heat-loss calculation, venting and chimney condition, and gas or oil supply sizing. Learn more about our boiler installation process, or see current rebate and incentive programs that may apply.
Warranty & Protection
Parts Warranty
1 year
Heat Exchanger
12 years
Our Guarantee
100% Satisfaction
All NTI Boilers boiler installations by Home+ Air & Heat include our 1-year workmanship warranty, covering labor and any installation-related issues.
Compare the NTI Boilers Lineup
| Model | Efficiency | BTU Range | Fuel | Heat Exchanger Warranty |
|---|---|---|---|---|
| Vmax110P/153P (this model) | 95% AFUE | 20k - 153k BTU | natural gas/propane | 12 years |
| TX Series | 95% AFUE | 50k - 199k BTU | natural gas/propane | Limited lifetime |
| TRX085-199 | 95% AFUE | 20k - 199k BTU | natural gas/propane | 12 years |
| FTVN085-199 | 95% AFUE | 20k - 199k BTU | natural gas/propane | 12 years |
| Trinity Lx150-800 | 95% AFUE | 30k - 800k BTU | natural gas/propane | 12 years |
| Trinity TFT60-399 | 95% AFUE | 15k - 399k BTU | natural gas/propane | 12 years |
See the full NTI Boilers brand page for lineup context, or browse the Best Condensing Boilers guide to compare across brands.
Frequently Asked Questions
Ready for a Quote?
Get a free, no-obligation quote for NTI Vmax110P/153P installation in Nassau County.
Compare Boiler Brands
See how NTI Boilers compares to other top boiler manufacturers.
Similar Boiler Models to Compare
Other condensing boilers with similar efficiency ratings from different brands.


