
Utica Oneida HE
Model Number: 80-200 MBH
Oneida HE is a gas condensing heating-only boiler.
Technical Specifications
Source: manufacturer spec sheet · checked Sep 27, 2026
Prices depend on sizing, venting and piping in your home, so we quote every installation.
Sizing: the right size comes from a room-by-room heat-loss calculation, not the size of the old boiler or a rule of thumb. Oversized boilers short-cycle and waste fuel; steam systems are sized to the connected radiation instead. See how we approach boiler installation.
Home-Specific Operating Cost Review
No guaranteed annual savings or payback period
Historical Use
Fuel consumption and weather
Current Rates
Utility and delivered-fuel prices
System Design
Load, piping, controls, and temperatures
Full Specifications
- Model Number
- 80-200 MBH
- Efficiency (AFUE)
- 95.2%
- Boiler Type
- Condensing Boiler
- Fuel
- natural gas/propane
- Venting
- direct vent
- BTU Input Range
- 80k - 200k BTU
- Domestic Hot Water
- indirect-ready
- In Production
- Yes
- Parts Warranty
- 5 years
- Heat Exchanger Warranty
- 10 years
Specifications sourced from the manufacturer spec sheet, checked Sep 27, 2026.
Ideal For
Homes seeking efficient hydronic heat and a separate water heater
Expert Review: Utica Oneida HE
Oneida HE is a gas condensing heating-only boiler.
The Oneida brochure lists a stainless water-tube exchanger, 95.2% AFUE, up to 10:1 turndown and ten-year limited exchanger/five-year limited parts coverage. Listed input range: 80–200 MBH input. Venting on file: direct vent. Can supply domestic hot water through an indirect tank.
It is best suited to homes seeking efficient hydronic heat and a separate water heater. Before ordering, a contractor should complete a room-by-room heat-loss calculation, check the distribution system's water temperatures and confirm venting and clearances against the installation manual.
Pros: Condensing design captures heat from flue gases when return water is cool enough. Modulating burners can match output more closely to mild-weather loads. Can be paired with an indirect water heater for high-volume hot water. Multiple sizes (80–200 MBH input) allow sizing to a calculated heat loss. Considerations: Unlike Oneida CO it requires separate domestic hot-water equipment; plan venting and condensate disposal. Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings. Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials.
Specifications on this page come from the manufacturer documents linked below; always confirm figures for the exact size being installed.
Key Features & Technology
The Oneida brochure lists a stainless water-tube exchanger, 95.2% AFUE, up to 10:1 turndown and ten-year limited exchanger/five-year limited parts coverage.
Listed input range: 80–200 MBH input.
Venting on file: direct vent.
Can supply domestic hot water through an indirect tank.
Advantages
- Condensing design captures heat from flue gases when return water is cool enough.
- Modulating burners can match output more closely to mild-weather loads.
- Can be paired with an indirect water heater for high-volume hot water.
- Multiple sizes (80–200 MBH input) allow sizing to a calculated heat loss.
Considerations
- Unlike Oneida CO it requires separate domestic hot-water equipment; plan venting and condensate disposal.
- Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings.
- Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials.
Sizing & Installation Notes
Condensing boilers like the Oneida HE reach their rated efficiency only when return water runs cool enough to condense flue gases. We check your radiation and design water temperatures so the unit actually condenses in your home, not just on the spec sheet.
Every Utica installation starts with a free in-home assessment covering the heat-loss calculation, venting and chimney condition, and gas or oil supply sizing. Learn more about our boiler installation process, or see current rebate and incentive programs that may apply.
Warranty & Protection
Parts Warranty
5 years
Heat Exchanger
10 years
Our Guarantee
100% Satisfaction
All Utica boiler installations by Home+ Air & Heat include our 1-year workmanship warranty, covering labor and any installation-related issues.
Compare the Utica Lineup
| Model | Efficiency | BTU Range | Fuel | Heat Exchanger Warranty |
|---|---|---|---|---|
| Oneida HE (this model) | 95.2% AFUE | 80k - 200k BTU | natural gas/propane | 10 years |
| SFE V | 82% AFUE | 126k - 294k BTU | oil | 10-yr limited |
| MGB-K | 84% AFUE | 59k - 235k BTU | natural gas | 20-yr non-prorated |
| PEG E | 83.4% AFUE | 75k - 299k BTU | natural gas | 12-yr (current sheet; up from 10-yr) |
| AT electric | Not verified | Various sizes available | electric | 20 years (submittal) |
| Oneida CO (combi) | 95.2% AFUE | 80k - 200k BTU | natural gas/propane | 10 years |
See the full Utica brand page for lineup context, or browse the Best Condensing Boilers guide to compare across brands.
Frequently Asked Questions
Ready for a Quote?
Get a free, no-obligation quote for Utica Oneida HE installation in Nassau County.
Compare Boiler Brands
See how Utica compares to other top boiler manufacturers.
Similar Boiler Models to Compare
Other condensing boilers with similar efficiency ratings from different brands.


