Bipul Mainali
Long Island, NY · Jan 2026
“They replaced my old, oxidized copper pipes connected to the boiler. The work was completed neatly, and the price was fair.”
Best for: Budget-Friendly Cast Iron
Crown Boiler offers steam boilers suitable for Long Island's pre-war homes with radiator systems.
Learn More →Yes — Crown Boiler boilers are a strong value pick. Our editorial score is 4.5/5 based on published efficiency, climate fit, warranty, features, and price positioning. Crown Boiler is associated with Crown Industries; confirm the exact model platform, parts path, and coverage rather than assuming they are shared. For a Long Island home, compare the exact matched system and written installation scope because design and commissioning can matter as much as the badge on the equipment.
Ratings are editorial comparison scores—not customer reviews, installation counts, or manufacturer endorsements.
A useful Crown Boiler comparison starts with the exact indoor and outdoor model pairing—not the brand name alone. Home+ Air & Heat can review Crown Boiler boiler options for homes in our covered Nassau County, Suffolk County and the five NYC boroughs service areas, then document whether the proposed equipment, capacity, electrical scope, and installation approach fit the project.
Before work is authorized, ask for the design method, AHRI match where applicable, installer or dealer qualification required by the manufacturer, registration responsibility, parts coverage, labor coverage, exclusions, and current incentive assumptions in writing. Those details vary by model, project, contractor status, installation date, and current program rules.
Crown Boiler rates 4.5 out of 5 in our value-tier boiler assessment. The scoring reflects build quality, parts availability on Long Island, warranty terms, and how the equipment holds up in the homes we service. Best for: Budget-Friendly Cast Iron. Reviews are only half the picture — sizing and installation quality drive most of the failures we get called to.
This is Home+ Air & Heat's own editorial assessment as an insured installing contractor, not an average of customer star ratings.
Crown Boiler proves that quality heating doesn't have to break the bank. Here's why we recommend Crown Boiler for homeowners who want reliable performance without the premium price.
20 years heat exchanger warranty shows manufacturer confidence.
Specialized steam boiler options for Long Island's older homes with radiator systems.
Quality performance without the premium price tag.
Proudly designed and manufactured in the United States.
Overall Score
Great For
Not Ideal For
Crown Boiler brings over 70 years of American manufacturing heritage to Nassau County homes, specializing in cast iron steam and hot water boilers that Long Island contractors know and trust. Our Trotta installation teams appreciate Crown's reliable construction and excellent parts availability.
The Aruba and Bermuda series represent Crown's high-efficiency offerings at up to 95% AFUE, while their cast iron steam boilers serve the many pre-war Long Island homes still running steam heat. Crown understands the unique demands of older housing stock.
For homeowners in communities like Garden City, Rockville Centre, and Floral Park with existing steam systems, Crown provides direct replacement options that integrate seamlessly. The company's focus on traditional boiler technology means extensive experience with steam applications.
Local parts availability through major distributors and HVAC supply houses throughout Nassau County ensures same-day service support. Crown's straightforward design simplifies repairs and reduces long-term maintenance costs.
PSEG Long Island rebates apply to qualifying Crown high-efficiency installations. The 20-year limited warranty on cast iron sections demonstrates confidence in their manufacturing.
For homeowners with steam heat systems or those seeking traditional American-made reliability at competitive pricing, Crown Boiler delivers proven performance backed by decades of Long Island installation experience.
— Blake Ruwali, Home+ Air & Heat
Crown Boiler models with published specifications.
Crown flagship cast iron hot water boiler at value pricing.
Best for: Budget-conscious hot water replacements for rental properties
$3,000 - $5,500installed
View Full DetailsCrown Boiler boiler models with published AFUE, boiler type and typical installed price ranges.
Model: BWC
Crown flagship cast iron hot water boiler at value pricing.
Estimated Installed Price:
$3,000 - $5,500
Best For
Budget-conscious hot water replacements for rental properties
Model: MFX
Versatile cast iron boiler for budget-conscious installations.
Estimated Installed Price:
$2,800 - $5,000
Best For
Rental properties and investment homes
Model: ABS
Budget steam boiler for landlords and investment properties.
Estimated Installed Price:
$2,500 - $4,500
Best For
Multi-family steam systems in Hempstead and Roosevelt
Model: PHX080-210
A 95% AFUE heating-only condensing boiler with deep modulation, direct venting, and indirect-water-heater compatibility.
Estimated Installed Price:
Contact for pricing
Best For
Homeowners who want Crown's most efficient, most flexible hot water boiler with chimney-free venting.
Model: AWR070-295
A current-generation cast-iron gas hot water boiler rated 84% AFUE, with seven chimney-vented sizes from 70,000 to 295,000 BTU/hr.
Estimated Installed Price:
Contact for pricing
Best For
Long Island homes with an existing chimney that want a straightforward, easy-to-service gas hot water boiler.
Model: BWC120-300
A condensing gas boiler with a cast-aluminum heat exchanger, direct venting, and a documented 15-year limited heat-exchanger warranty.
Estimated Installed Price:
Contact for pricing
Best For
Homeowners upgrading to high efficiency who want condensing savings with flexible, chimney-free venting.
Model: FWZ040-150
A cast-iron oil hot water boiler around 86% AFUE, with chimney venting and models from 91,000 to 158,000 BTU/hr.
Estimated Installed Price:
Contact for pricing
Best For
Oil-heated Long Island homes that want better-than-typical oil efficiency without converting to gas.
Model: CT-3/4/5
A chimney-vented cast-iron oil hot water boiler around 85% AFUE, offered from 105,000 to 196,000 BTU/hr.
Estimated Installed Price:
Contact for pricing
Best For
Oil-heated homes wanting a conventional, indirect-ready boiler in the 105k–196k BTU range.
Model: TWZ075-150
A conventional cast-iron oil hot water boiler around 86% AFUE, with chimney venting and indirect-water-heater compatibility.
Estimated Installed Price:
Contact for pricing
Best For
Oil-heated homes in the 91k–158k BTU range wanting a conventional, indirect-ready boiler.
Model: TWZ
A chimney-vented cast-iron oil hot water boiler rated up to 86.1% AFUE, spanning roughly 70,000–210,000 BTU/hr.
Estimated Installed Price:
Contact for pricing
Best For
Oil-heated homes of almost any size that want top-tier oil efficiency.
Model: CWI172-363
A conventional cast-iron gas hot water boiler with natural-draft chimney venting, up to 83.5% AFUE, and 103,000–379,000 BTU/hr inputs.
Estimated Installed Price:
Contact for pricing
Best For
Large homes and light-commercial properties that need a high-input conventional gas hot water boiler and have a suitable chimney.
Model: PH2
A 95% AFUE heating-only condensing gas boiler with direct venting, 8,000–180,000 BTU/hr modulation, and deep turndown.
Estimated Installed Price:
Contact for pricing
Best For
Homes with widely varying zone loads that want condensing efficiency and deep modulation.
Model: PH2C
A wall-hung 95% AFUE combi boiler providing space heat and on-demand hot water with 13,600–200,000 BTU/hr modulation.
Estimated Installed Price:
Contact for pricing
Best For
Smaller to mid-size homes that want one high-efficiency appliance for heat and hot water.
Model: PHC130-199
An earlier Velocity Phantom heating-only condensing boiler family; exact model identity and capacity should be confirmed before selection.
Estimated Installed Price:
Contact for pricing
Best For
Existing owners researching an earlier Velocity Phantom heating-only boiler after confirming the exact model number on the rating plate.
Model: BWF061-229
A conventional cast-iron gas hot water boiler rated 84% AFUE, spanning 61,000–229,000 BTU/hr with chimney venting.
Estimated Installed Price:
Contact for pricing
Best For
Gas-heated homes with a chimney looking for a conventional, indirect-ready hot water boiler.
Model: BSI103-276
A chimney-vented cast-iron gas steam boiler rated 82% AFUE, offered from 103,000 to 276,000 BTU/hr.
Estimated Installed Price:
Contact for pricing
Best For
Older Long Island homes with one-pipe or two-pipe steam radiators that need a like-for-like steam boiler replacement.
Model: BSI
A cast-iron gas or propane steam boiler with chimney venting and a broad 69,000–380,000 BTU/hr input range.
Estimated Installed Price:
Contact for pricing
Best For
Steam-heated homes of almost any size, including propane-fired installations and very large older houses.
Model: FSZ
A chimney-vented steam boiler entry spanning 80,000–160,000 BTU/hr; verify the exact fuel and model designation before selection.
Estimated Installed Price:
Contact for pricing
Best For
Smaller steam-heated homes, including propane installations, replacing an aging steam boiler.
Model: KSZ
An oil-fired cast-iron steam boiler with chimney venting, covering approximately 59,000–176,000 BTU/hr.
Estimated Installed Price:
Contact for pricing
Best For
Older oil-heated homes with steam radiators that want the most efficient oil steam replacement available.
Model: CWD083-245
A conventional cast-iron gas or propane hot water boiler with chimney venting and an 83,000–245,000 BTU/hr range.
Estimated Installed Price:
Contact for pricing
Best For
Homes with a chimney that want a conventional, easy-to-service gas or propane hot water boiler.
Model: AWR/AWI
A conventional cast-iron hot water boiler with chimney-vented AWR and direct-vent AWI versions, rated 83.3% AFUE across 38,000–280,000 BTU/hr.
Estimated Installed Price:
Contact for pricing
Best For
Homes that need a conventional cast-iron boiler with a direct-vent option where no chimney is available.
*Prices are estimates for Nassau County installations. Actual cost depends on home size, system complexity, and model selection.
Every Crown Boiler model family we track, with efficiency, size range, heat-exchanger warranty and a link to the manufacturer's data. Discontinued lines are flagged so you know what parts and service support to expect. Installed prices depend on your home, so every install is quoted.
| Model | Type | Fuel | AFUE | BTU input | Heat exchanger warranty | Source |
|---|---|---|---|---|---|---|
| Bermuda BWC | Hot water | — | 87% | 42k–252k | 20 years | — |
| Mega-Flex | Hot water | — | 85% | 42k–175k | 20 years | — |
| Aruba | Steam | — | 82% | 70k–196k | 20 years | — |
| Velocity Phantom-X | Condensing | natural gas/propane | 95% | 8k–210k | 12 years | Spec sheet |
| Aruba 5 | Hot water | natural gas/propane | 84% | 70k–295k | 12 years | Spec sheet |
|
Bimini BWC
Being verified
|
Condensing | natural gas/propane | 95% | 30k–300k | 15-year limited | Spec sheet |
| Freeport 2 | Oil hot water | oil | 86% | 91k–158k | 12 years | Spec sheet |
| Freeport CT | Oil hot water | oil | 85% | 105k–196k | limited lifetime | Spec sheet |
| Tobago | Oil hot water | oil | 86% | 91k–158k | 12 years | Spec sheet |
| Tobago (TWZ) | Oil hot water | oil | 86.1% | 70k–210k | 12-yr limited | Spec sheet |
|
Cayman
Being verified
|
Hot water | natural gas | 83.5% | 103k–379k | limited lifetime; verify current Cayman terms | Spec sheet |
| Phantom II | Condensing | natural gas/propane | 95% | 8k–180k | 12-year limited | Spec sheet |
| Phantom II Combi | Combi | natural gas/propane | 95% | 14k–200k | 12-year limited | Spec sheet |
| Velocity Phantom Combi | Condensing | natural gas/propane | 95% | 16k–199k | 12-year limited | Spec sheet |
| Bali | Hot water | natural gas | 84% | 61k–229k | 12 years | Spec sheet |
| Bermuda | Steam | natural gas | 82% | 103k–276k | 12 years | Spec sheet |
| Bermuda (BSI) | Steam | natural gas/propane | 82.5% | 69k–380k | 12-yr limited | Spec sheet |
| Freeport 2 (FSZ) | Steam | natural gas/propane | 83.3% | 80k–160k | 12-yr limited | Spec sheet |
| Kingston (KSZ) | Oil steam | oil | 85.4% | 59k–176k | 12-yr limited | Manufacturer |
| Cabo 2 | Hot water | natural gas/propane | 84% | 83k–245k | 12 years | Spec sheet |
| Aruba | Hot water | natural gas/propane | 83.3% | 38k–280k | limited lifetime | Spec sheet |
Estimated installed price: $2,500–$6,000. Estimate only, not a verified quote. Installed price varies with the model, your home and the system type, so every install is quoted.
Home+ services and installs Crown Boiler boilers across Nassau County, Suffolk County and the five NYC boroughs. See boiler installation, boiler repair, or compare every brand's lineup.
Understanding what's covered and how to protect your investment.
Parts Warranty
2 years
Covers major components like controls and pumps
Heat Exchanger
20 years
The heart of your boiler—cast iron or stainless steel
Labor Coverage
1 year
Manufacturer coverage for service calls
Extended Options
Available through dealer
Additional protection beyond standard warranty
Installed prices for Crown Boiler boilers range from $2,500 to $6,000 in Nassau County. Price varies by model efficiency, home size, and installation complexity.
$2,500 - $3,655
Entry-level models with solid performance
$3,655 - $4,810
Best balance of features and value
$4,810 - $6,000
Top-tier efficiency and features
Standard Installation
New boiler, same location
Steam-to-Hot Water Conversion
Complete system change
Chimney Liner
Required for high-efficiency
* Prices reflect typical installed costs in Nassau County as of September 2026. Actual costs may vary based on home size, system complexity, and local factors.
Recent Google reviews
Recent public reviews from homeowners who hired Home+ Air & Heat.
Bipul Mainali
Long Island, NY · Jan 2026
“They replaced my old, oxidized copper pipes connected to the boiler. The work was completed neatly, and the price was fair.”
Aaron Ramnarine
Long Island, NY · Jan 2026
“These guys do great work and are easy to deal with. I needed some work done on my boiler for the winter and everything was done easily in a timely manner. Will definitely be using them again in the future.”
Matthew Hoosein
Long Island, NY · Jan 2026
“I had a great experience with Homets Air and Heat. My heating system stopped working the other day, and they responded quickly with a clear explanation and prompt repair.”
Lochana Subedi
Hicksville, NY · Jan 2026
“I am a tenant in Hicksville, and when my heat went out during this cold stretch, it was a total emergency. The technician quickly resolved the heating issue.”
Khim Bhattarai
Long Island, NY · Jan 2026
“I hired them to fix my heat as it stopped working. They were quick to diagnose and fix it even during late hours.”
Devendra Bhattarai
Jamaica, NY · Dec 2025
“Heat stopped working in my Jamaica, NY home and these guys came out fast. They explained what was wrong, fixed it the same visit, and were very reasonable.”
Here's where Crown Boiler boilers tend to fit best across Long Island.
Crown Boiler's steam boiler expertise is essential for the cast iron radiators common in pre-1950 South Shore homes.
Crown Boiler's straightforward design and competitive pricing make it ideal for landlords managing multiple properties.
Installer Note: These are general guidelines based on our Nassau County experience. Every home is unique—we'll assess your specific heating needs during our free consultation.
See how Crown Boiler compares to other top boiler brands we install in Nassau County.
| Feature |
C
Current
|
![]() #1 |
P #9 |
![]() #2 |
|---|---|---|---|---|
|
Expert Rating
|
4.55/5
|
4.9/5
|
4.5/5
|
4.85/5
|
|
Max Efficiency
|
87%
|
95%
|
87%
|
95%
|
|
Starting Price
|
$2,500+
|
$4,500+
|
$2,800+
|
$4,000+
|
|
Heat Exchanger Warranty
|
20 years
|
Lifetime (cast iron)
|
Limited lifetime
|
Lifetime (cast iron) / 20 years (stainless)
|
| Best For | Budget-Friendly Cast Iron | Steam & Cast Iron Reliability | Traditional Cast Iron Value | Residential Hot Water Systems |
Get a personalized recommendation in 2 minutes
✓ Insured installers • ✓ Free in-home estimates • ✓ Financing available
Budget-Friendly Cast Iron
Crown Boiler delivers solid performance at an accessible price point. While it may lack some premium features, it's a reliable choice for budget-conscious homeowners who still want quality American manufacturing.
Our Rating
4.55/5
Max Efficiency
87% AFUE
Heat Exchanger
20 years
Price Range
$2,500-$6,000
— Blake Ruwali, Home+ Air & Heat
Get answers to the most common questions about Crown Boiler boilers for Long Island homes.
Comprehensive guides for boiler installation, repair, and maintenance
Crown Boiler makes these boiler types. Explore our full recommendations:
Free estimate from Nassau County's boiler experts
Installed Price Range:
$2,500 – $6,000
*Includes equipment and labor
A great boiler installer on Long Island will outperform a premium unit installed poorly. Use the verification checklist and three-estimate worksheet before you sign anything.
Open the contractor comparison guide