Bipul Mainali
Long Island, NY · Jan 2026
“They replaced my old, oxidized copper pipes connected to the boiler. The work was completed neatly, and the price was fair.”

Best for: Steam & Cast Iron Reliability
Weil-McLain offers steam boilers suitable for Long Island's pre-war homes with radiator systems.
Learn More →Yes — Weil-McLain boilers are a premium-tier choice. Our editorial score is 4.9/5 based on published efficiency, climate fit, warranty, features, and price positioning. Weil-McLain is associated with Marley-Wylain; confirm the exact model platform, parts path, and coverage rather than assuming they are shared. For a Long Island home, compare the exact matched system and written installation scope because design and commissioning can matter as much as the badge on the equipment.
Ratings are editorial comparison scores—not customer reviews, installation counts, or manufacturer endorsements.
A useful Weil-McLain comparison starts with the exact indoor and outdoor model pairing—not the brand name alone. Home+ Air & Heat can review Weil-McLain boiler options for homes in our covered Nassau County, Suffolk County and the five NYC boroughs service areas, then document whether the proposed equipment, capacity, electrical scope, and installation approach fit the project.
Before work is authorized, ask for the design method, AHRI match where applicable, installer or dealer qualification required by the manufacturer, registration responsibility, parts coverage, labor coverage, exclusions, and current incentive assumptions in writing. Those details vary by model, project, contractor status, installation date, and current program rules.
Weil-McLain rates 4.9 out of 5 in our premium-tier boiler assessment. The scoring reflects build quality, parts availability on Long Island, warranty terms, and how the equipment holds up in the homes we service. Best for: Steam & Cast Iron Reliability. Reviews are only half the picture — sizing and installation quality drive most of the failures we get called to.
This is Home+ Air & Heat's own editorial assessment as an insured installing contractor, not an average of customer star ratings.
Weil-McLain has earned its reputation as one of the premier boiler manufacturers. Here's why our installers recommend Weil-McLain to homeowners looking for the best in home heating.
Up to 95% AFUE helps reduce your monthly energy bills.
Specialized steam boiler options for Long Island's older homes with radiator systems.
A legacy of manufacturing excellence and continuous innovation.
Attention to every detail, from heat exchanger to cabinet construction.
Overall Score
Great For
Not Ideal For
Weil-McLain is one of the oldest American hydronic boiler makers, building boilers since the 1880s. Its lineup covers wall-hung condensing gas boilers (Evergreen Pro, ECO Tec, Ultra), combi boilers that also make hot water (AquaBalance, Simplicity), floor-standing cast-iron gas boilers for hot water and steam (CGa, CGi, EG), and cast-iron oil boilers (WGO/WTGO, Ultra Oil, SGO).
The cast-iron lines are a common like-for-like replacement in older homes with radiators, steam systems or an existing chimney. The condensing lines suit baseboard and radiant systems where cooler return water lets the boiler reach its rated efficiency.
Heat-exchanger warranty terms differ by line, so read the certificate for the exact model. Size the boiler from a heat-loss calculation, not the old nameplate, and budget for venting or a chimney liner. As with any brand, installation quality matters more than the badge.
— Blake Ruwali, Home+ Air & Heat
Weil-McLain has built hydronic boilers since the 1880s. Its range splits into wall-hung condensing gas boilers, combi units, floor-standing cast-iron gas boilers (hot water and steam) and cast-iron oil boilers. Pick the line first by fuel and venting, then by size.
Wall-hung, modulating units vented through PVC or approved plastic piping instead of a chimney.
Est. $7,500–$12,000 installed
One wall-mounted condensing unit that heats the house and makes on-demand hot water.
Priced after a site visit
Floor-standing replacements for homes keeping existing chimneys and piping.
Est. $4,500–$8,000 installed
Cast-iron oil boilers, including tankless-coil options for domestic hot water.
Priced after a site visit
Estimates are Home+ planning ranges for the Ultra, CGi and EG lines, not quotes; piping, venting, and chimney work change the final price.
Moving from an older 65–70% boiler to an 84–87% cast-iron unit cuts fuel use noticeably; a 95% condensing boiler saves more only when return water runs cool enough to condense, which favors baseboard or radiant systems over steam. Condensing boilers need new plastic venting and a condensate drain, while a cast-iron replacement on an existing chimney often needs a liner. Size from a room-by-room heat-loss calculation, not the old boiler's nameplate. See our boiler installation guide, steam boiler installation and radiant floor heating.
Heat-exchanger coverage differs by line: cast-iron sections and condensing exchangers carry different terms, so check the warranty on each model page or the Weil-McLain certificate. Yearly service should include combustion analysis, relief-valve and low-water-cutoff checks, expansion-tank pressure, and condensate trap cleaning on condensing units. Need help now? Boiler repair or emergency boiler repair.
Weil-McLain models with published specifications.
Weil-McLain flagship condensing boiler with 95% AFUE efficiency and modulating technology for maximum comfort.
Best for: Modern hot water systems in energy-conscious homes
$7,500 - $12,000installed
View Full DetailsWeil-McLain boiler models with published AFUE, boiler type and typical installed price ranges.
Model: UL3
Weil-McLain flagship condensing boiler with 95% AFUE efficiency and modulating technology for maximum comfort.
Estimated Installed Price:
$7,500 - $12,000
Best For
Modern hot water systems in energy-conscious homes
Model: CGi-4
Reliable cast iron hot water boiler ideal for multi-zone Long Island colonials.
Estimated Installed Price:
$5,000 - $8,000
Best For
Traditional hot water baseboard systems in 2,000-3,500 sq ft homes
Model: EG-45
The workhorse cast iron steam boiler trusted in Long Island pre-war homes for generations.
Estimated Installed Price:
$4,500 - $7,500
Best For
Pre-war steam radiator homes in Garden City, Hempstead, and Freeport
Model: EG
EG Series 6/7 steam boiler, 84.0% AFUE, 75,000-282,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Older homes with gas-fired steam heat that need a straightforward replacement
Model: EVG
Evergreen Pro condensing boiler, 95.0% AFUE, 110,000-399,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Larger homes and high-load hot-water systems that want top condensing efficiency
Model: GV90
GV90+ condensing boiler, 91.9% AFUE, 70,000-175,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Owners who want a cast-iron boiler with condensing-level efficiency and PVC venting
Model: SIM
Simplicity combi boiler, 95.0% AFUE, 110,000-199,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Gas homes wanting a high-capacity combi for heat and on-demand hot water
Model: ULO
Ultra Oil oil-hot-water boiler, 87.0% AFUE, 112,000-196,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Oil hot-water homes that want more venting flexibility than a chimney-only boiler
Model: WGO
WGO/WTGO Series 4 oil-hot-water boiler, 87.0% AFUE, 98,000-357,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Oil hot-water homes replacing an older cast-iron boiler, with or without a tankless coil
Model: AB
AquaBalance Series 2 combi boiler, 95.0% AFUE, 80,000-155,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Homes choosing between compact heat-only and combi gas heating
Model: CGi
CGi Series 5 hot-water boiler, 84.0% AFUE, 48,000-222,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Gas hot-water replacements with an appropriate induced-draft vent path
Model: ECO
ECO Tec condensing boiler, 95.0% AFUE, 80,000-199,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Gas hot-water homes comparing an indirect tank with a dedicated combi model
Model: ULT
Ultra Gas Series 4 condensing boiler, 94.1% AFUE, 80,000-399,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Gas hot-water systems matching a selected Ultra size to calculated load
Model: SGO
SGO Series 4 oil-steam boiler, 85.0% AFUE, 133,000-357,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Oil-heated homes with steam radiators
Model: CGa
CGa Series 4 hot-water boiler, 84.0% AFUE, 38,000-233,000 BTU/hr range
Estimated Installed Price:
Contact for pricing
Best For
Budget-conscious replacements of older atmospheric gas boilers in homes with a working chimney
*Prices are estimates for Nassau County installations. Actual cost depends on home size, system complexity, and model selection.
Every Weil-McLain model family we track, with efficiency, size range, heat-exchanger warranty and a link to the manufacturer's data. Discontinued lines are flagged so you know what parts and service support to expect. Installed prices depend on your home, so every install is quoted.
| Model | Type | Fuel | AFUE | BTU input | Heat exchanger warranty | Source |
|---|---|---|---|---|---|---|
| Ultra Series 3 | Condensing | — | 95% | 80k–399k | 15 years | — |
| CGi Series 4 | Hot water | — | 84% | 75k–175k | Lifetime | — |
| EG-45 | Steam | — | 82% | 105k–175k | Lifetime | — |
| EG Series 6/7 | Steam | natural gas/propane | 84% | 75k–282k | 10-year (EG/PEG steam) or 20-year (EG water) | Spec sheet |
| Evergreen Pro | Condensing | natural gas/propane | 95% | 110k–399k | lifetime limited | Spec sheet |
| GV90+ | Condensing | natural gas/propane | 91.9% | 70k–175k | primary (cast iron) 20-year, secondary (stainless) 5-year | Spec sheet |
| Simplicity | Combi | natural gas/propane | 95% | 110k–199k | lifetime limited | Spec sheet |
| Ultra Oil | Oil hot water | oil | 87% | 112k–196k | 20-year | Spec sheet |
| WGO/WTGO Series 4 | Oil hot water | oil | 87% | 98k–357k | 20-year | Spec sheet |
| AquaBalance Series 2 | Combi | natural gas/propane | 95% | 80k–155k | 10-year limited residential / 5-year limited commercial | Spec sheet |
| CGi Series 5 | Hot water | natural gas/propane | 84% | 48k–222k | 20-year residential / 10-year commercial limited transferable (CGi Series 5 sales flyer) | Spec sheet |
| ECO Tec | Condensing | natural gas/propane | 95% | 80k–199k | 12-year residential / 10-year commercial primary heat exchanger (brochure) | Spec sheet |
| Ultra Gas Series 4 | Condensing | natural gas/propane | 94.1% | 80k–399k | 12-year residential / 10-year commercial (Ultra Series 4 brochure) | Spec sheet |
| SGO Series 4 | Oil steam | oil | 85% | 133k–357k | 10-year | Spec sheet |
| CGa Series 4 | Hot water | natural gas/propane | 84% | 38k–233k | 20-year | Spec sheet |
Estimated installed price: $4,500–$12,000. Estimate only, not a verified quote. Installed price varies with the model, your home and the system type, so every install is quoted.
Home+ services and installs Weil-McLain boilers across Nassau County, Suffolk County and the five NYC boroughs. See boiler installation, boiler repair, or compare every brand's lineup.
Understanding what's covered and how to protect your investment.
Parts Warranty
2 years
Covers major components like controls and pumps
Heat Exchanger
Varies by model line
The heart of your boiler—cast iron or stainless steel
Labor Coverage
1 year
Manufacturer coverage for service calls
Extended Options
Available up to 10 years
Additional protection beyond standard warranty
Installed prices for Weil-McLain boilers range from $4,500 to $12,000 in Nassau County. Price varies by model efficiency, home size, and installation complexity.
$4,500 - $6,975
Entry-level models with solid performance
$6,975 - $9,450
Best balance of features and value
$9,450 - $12,000
Top-tier efficiency and features
Standard Installation
New boiler, same location
Steam-to-Hot Water Conversion
Complete system change
Chimney Liner
Required for high-efficiency
* Prices reflect typical installed costs in Nassau County as of September 2026. Actual costs may vary based on home size, system complexity, and local factors.
Recent Google reviews
Recent public reviews from homeowners who hired Home+ Air & Heat.
Bipul Mainali
Long Island, NY · Jan 2026
“They replaced my old, oxidized copper pipes connected to the boiler. The work was completed neatly, and the price was fair.”
Aaron Ramnarine
Long Island, NY · Jan 2026
“These guys do great work and are easy to deal with. I needed some work done on my boiler for the winter and everything was done easily in a timely manner. Will definitely be using them again in the future.”
Matthew Hoosein
Long Island, NY · Jan 2026
“I had a great experience with Homets Air and Heat. My heating system stopped working the other day, and they responded quickly with a clear explanation and prompt repair.”
Lochana Subedi
Hicksville, NY · Jan 2026
“I am a tenant in Hicksville, and when my heat went out during this cold stretch, it was a total emergency. The technician quickly resolved the heating issue.”
Khim Bhattarai
Long Island, NY · Jan 2026
“I hired them to fix my heat as it stopped working. They were quick to diagnose and fix it even during late hours.”
Devendra Bhattarai
Jamaica, NY · Dec 2025
“Heat stopped working in my Jamaica, NY home and these guys came out fast. They explained what was wrong, fixed it the same visit, and were very reasonable.”
Here's where Weil-McLain boilers tend to fit best across Long Island.
Weil-McLain's Varies by model line heat exchanger warranty provides peace of mind for long-term residents.
Weil-McLain's steam boiler expertise is essential for the cast iron radiators common in pre-1950 South Shore homes.
Weil-McLain's stainless steel components resist the accelerated corrosion from salt air within a mile of the shore.
Installer Note: These are general guidelines based on our Nassau County experience. Every home is unique—we'll assess your specific heating needs during our free consultation.
See how Weil-McLain compares to other top boiler brands we install in Nassau County.
| Feature |
![]() Current
|
![]() #2 |
#4 |
![]() #3 |
|---|---|---|---|---|
|
Expert Rating
|
4.9/5
|
4.85/5
|
4.65/5
|
4.8/5
|
|
Max Efficiency
|
95%
|
95%
|
96%
|
98%
|
|
Starting Price
|
$4,500+
|
$4,000+
|
$3,800+
|
$6,500+
|
|
Heat Exchanger Warranty
|
Varies by model line
|
Lifetime (cast iron) / 20 years (stainless)
|
10 years, model-specific limited coverage
|
12 years
|
| Best For | Steam & Cast Iron Reliability | Residential Hot Water Systems | Reliable condensing boiler options across residential applications | Maximum Efficiency & German Engineering |
On the job
Photos from jobs where this brand was part of the work.
Replacement & installationWyandanch, NY·Oil boiler
See the job
Photos enhanced for clarity.
Get a personalized recommendation in 2 minutes
✓ Insured installers • ✓ Free in-home estimates • ✓ Financing available
Steam & Cast Iron Reliability
Weil-McLain is a premium choice for homeowners who prioritize long-term reliability and efficiency over upfront cost. With a Varies by model line heat exchanger warranty and efficiency up to 95% AFUE, this is a boiler built to last decades.
Our Rating
4.9/5
Max Efficiency
95% AFUE
Heat Exchanger
Varies by model line
Price Range
$4,500-$12,000
— Blake Ruwali, Home+ Air & Heat
Get answers to the most common questions about Weil-McLain boilers for Long Island homes.
Comprehensive guides for boiler installation, repair, and maintenance
Weil-McLain makes these boiler types. Explore our full recommendations:
Free estimate from Nassau County's boiler experts
Installed Price Range:
$4,500 – $12,000
*Includes equipment and labor
A great boiler installer on Long Island will outperform a premium unit installed poorly. Use the verification checklist and three-estimate worksheet before you sign anything.
Open the contractor comparison guide