Rising heating bills
Dirty burners and poor combustion waste fuel. A tune-up restores efficiency.
Expert boiler maintenance for gas, oil, steam & hydronic systems. Keep your home safe and warm all winter.
Home+ Comfort starts at $11.99/mo, paid up front as $143.88 for Year 1, then $29/mo or $299/year. Toggle to compare.
Included with Home+ Comfort — $143.88 first year, billed yearly up front; then $299/year or $29/month. No monthly billing in Year 1., two tune-up visits per year Join Home+ Comfort to lock this price
Essential annual boiler maintenance
Included with Home+ Signature — $359.88 first year, billed yearly up front; then $599/year or $59/month. No monthly billing in Year 1., one premium visit per covered system Join Home+ Signature to lock this price
Standard plus a deep clean and extended readings
Burners & flue passages on cast iron; condensate trap & electrodes on high-efficiency
Documented CO Readings
Ambient & flue, in ppm
Measured, Not Guessed
Signed report every visit
All Boiler Types
Gas, oil, steam & hydronic
Your boiler is the heart of your home's heating system. Regular maintenance keeps it running efficiently, safely, and reliably throughout the winter. At Home+ Air, we provide thorough boiler tune-ups that extend equipment life, reduce energy costs, and prevent emergency breakdowns.
Whether you have a gas, oil, or electric boiler — steam or hot water — our EPA 608-certified technicians have the expertise to service all makes and models. We follow manufacturer specifications and industry best practices to ensure your system performs at its best.
If you're experiencing issues, our boiler diagnostic service can identify the problem. For emergency situations, we offer Boiler repair; dispatch confirms your ETA when you call.
Dirty burners and poor combustion waste fuel. A tune-up restores efficiency.
Neglected boilers develop problems that lead to costly repairs or replacements.
Kettling, banging, or gurgling often indicate sediment buildup or circulation issues.
May indicate zone valve issues, air in the system, or circulator problems.
Indicates incomplete combustion and potential carbon monoxide risk.
Older systems need more attention to maintain safety and efficiency.
Carbon monoxide readings and heat exchanger safety are never an upsell here. Every heating tune-up — Standard (46 checks) or Premium (53 checks) — includes the same documented safety inspection.
Accessible heat exchanger surfaces inspected for cracks, rust, and deterioration
Carbon monoxide measured in the equipment area and recorded in ppm on your job record
Carbon monoxide measured inside the flue or vent pipe and recorded in ppm
Both readings assessed against safe limits — unsafe results mean immediate shutdown and notification
Overall heat exchanger condition rated on the record, so any replacement advice is documented
Flame rollout switches verified intact and correctly mounted — never bypassed
High-limit and auxiliary limit switches tested for correct opening and reset
Venting inspected for blockage, corrosion, slope, and secure joints along the accessible run
Standard already runs the full safety inspection and, on gas, a full combustion analysis. Premium is the hands-on cleaning Standard leaves in place, the extra readings and a photo report.
Burners pulled and cleaned (gas), smoke pipe and chimney base (oil), coil foam-clean or head wash (heat pump, mini-split) — on gas, the combustion analysis itself is in every Standard visit
Static pressure and blower motor amp draw on a furnace, on top of the combustion analysis Standard already takes on gas
Photos of the cleaning and of the analyzer reading, attached to your report
Don't risk your family's safety. Schedule your tune-up before winter.
Standard is the full tune-up with every required reading for your system — on gas and oil that includes carbon monoxide and combustion analysis. Premium adds real deep-clean work, extra readings and a photo report.
Cast iron and condensing boilers get different Premium work
Work: Safety; gas leak test; ignition; burner area vacuumed; the full water side (pressure, expansion tank, relief valve, low-water cutoff, aquastat, zones, vents, fill); air bled; water pH and inhibitor tested; on condensing boilers the trap and neutralizer checked.
Readings: CO, combustion analysis, manifold pressure, supply and return temperatures.
Adds work: Cast iron: burners pulled and cleaned, flue passages brushed and vacuumed, resealed. Condensing: trap removed and cleaned, electrodes cleaned. Connections torqued.
Readings: Same readings as Standard, plus a photo report.
Work: Full oil burner cleaning: new nozzle, oil filter and strainer; electrodes set; burner head and fan cleaned; plus the full hot-water side and the water pH test.
Readings: Full combustion test with smoke number, pump pressure, supply and return temperatures.
Adds work: Smoke pipe taken down, brushed and resealed; barometric damper set; chimney-base cleanout; oil tank and lines checked; connections torqued.
Readings: Adds burner motor amps, plus a photo report.
Work: Safety; gas; ignition; burner area vacuumed; the steam side: water level, gauge glass cleaned, low-water cutoff flushed and tested, pressuretrol, pigtail, safety valve, Hartford loop.
Readings: CO, combustion analysis, manifold pressure, operating pressure.
Adds work: Burners pulled and cleaned; flue passages brushed and vacuumed; pigtail and gauge glass cleaned; main air vents checked; connections torqued.
Readings: Same readings as Standard, plus a photo report.
Work: Full oil burner cleaning: new nozzle, oil filter and strainer; electrodes set; burner head and fan cleaned; plus the full steam side.
Readings: Full combustion test with smoke number, operating pressure.
Adds work: Smoke pipe taken down, brushed and resealed; barometric damper set; chimney-base cleanout; oil tank and lines checked; connections torqued; plus pigtail, gauge glass and main vents.
Readings: Adds burner motor amps, plus a photo report.
Every heating tune-up is completed on the same checklist our technicians fill out in the field — 46 checks at the Standard level, 53 with Premium cleaning, measurements and photos. These are the readings and results that end up on your record.
Findings may change the recommended work. Any added repairs are quoted and approved before we start.
Different boiler systems require different maintenance approaches. We tailor every tune-up to your specific equipment.
Most common in newer Nassau County homes. Efficient and clean-burning.
Common in older Long Island homes. Requires specialized maintenance including filter and nozzle replacement.
Found in many pre-war Nassau County homes with radiator systems. Unique maintenance needs.
Modern forced hot water systems with baseboards or radiant floor heating.
Regular maintenance prevents costly problems. Here's what neglect looks like over time.
2-5% efficiency drop, slight increase in energy bills. Components beginning to collect dust and residue.
Inconsistent heating, noticeable efficiency loss. Increased risk of minor breakdowns and component wear.
15-20% efficiency loss, voided warranties. Parts like pumps, valves, and controls showing significant wear.
Expensive emergency repairs, safety hazards, potential heat exchanger damage. Full replacement may be needed.
Our $299-$449 annual tune-up prevents all of these issues and keeps your boiler running safely and efficiently.
Schedule Your Tune-Up Today → (516) 259-1191Step-by-step process for professional boiler tune-up and safety inspection
Call or book online. We'll confirm a convenient time and provide a reminder before your appointment.
Our EPA 608-certified technician arrives on time, reviews your boiler's history, and discusses any concerns you've noticed.
We perform a thorough inspection including combustion analysis, pressure testing, safety control verification, and component checks.
We clean burners, heat exchangers, and components. Adjust settings for optimal efficiency and performance.
Carbon monoxide testing, relief valve verification, and complete written report with recommendations.
Choose the service level that's right for your boiler
Home+ Comfort starts at $11.99/mo, paid up front as $143.88 for Year 1, then $29/mo or $299/year. Toggle to compare.
The full annual checklist
Included with Home+ Comfort — $143.88 first year, billed yearly up front; then $299/year or $29/month. No monthly billing in Year 1., two tune-up visits per year Join Home+ Comfort to lock this price
Standard plus the deep clean and a photo report
Included with Home+ Signature — $359.88 first year, billed yearly up front; then $599/year or $59/month. No monthly billing in Year 1., one premium visit per covered system Join Home+ Signature to lock this price
All prices include complete service, testing, and written report. No fees. Premium customers receive 15% off any repairs needed.
Financing options are available through Synchrony Bank, subject to credit approval and the lender's current terms. Review the full offer before applying.
Equipment capability is confirmed from the make, model, age, condition, and requested scope before scheduling.









Don't see your equipment listed? Call us (516) 259-1191 to confirm service capability for the make and model.
Get answers to common questions about our services
Recent Google reviews
Recent public reviews from homeowners who hired Home+ Air & Heat.
Loading recent reviews…
Help other Nassau County homeowners by sharing your experience. It only takes a minute!
Currently 5 stars with 122 reviews
Fast, reliable service in your neighborhood
Our homeowners' top picks for heating, cooling & air quality
Furnace Installation
Save $500 on a new high-efficiency furnace installation with our 1-year labor warranty.
Boiler Installation
Save $500 on a new boiler installation. High-efficiency models available with financing options.
Home+ Air & Heat
55 Jericho Tpke, Suite 203
Jericho, NY 11753
Phone
(516) 259-1191Hours
Call us to schedule service
Serving Nassau, Suffolk and the five NYC boroughs