Heat Exchanger Visual Inspection
Accessible heat exchanger surfaces inspected for cracks, rust, and deterioration
Choose the service level that fits your needs. Essential maintenance or comprehensive safety inspection for reliable winter heating.
Home+ Comfort starts at $11.99/mo your first year ($143.88), then $299/year. Toggle to compare.
Included with Home+ Comfort — $11.99/mo first year, then $299/yr, two tune-up visits per year Join Home+ Comfort to lock this price
Essential annual maintenance
Included with Home+ Signature — $599/year, one premium visit per covered system Join Home+ Signature to lock this price
Standard plus a deep clean and extended readings
Burners out and cleaned; condensate trap & tubing on high-efficiency furnaces
Documented CO Readings
Ambient & flue, in ppm
Measured, Not Guessed
Signed report every visit
Carbon monoxide readings and heat exchanger safety are never an upsell here. Every heating tune-up — Standard (46 checks) or Premium (53 checks) — includes the same documented safety inspection.
Accessible heat exchanger surfaces inspected for cracks, rust, and deterioration
Carbon monoxide measured in the equipment area and recorded in ppm on your job record
Carbon monoxide measured inside the flue or vent pipe and recorded in ppm
Both readings assessed against safe limits — unsafe results mean immediate shutdown and notification
Overall heat exchanger condition rated on the record, so any replacement advice is documented
Flame rollout switches verified intact and correctly mounted — never bypassed
High-limit and auxiliary limit switches tested for correct opening and reset
Venting inspected for blockage, corrosion, slope, and secure joints along the accessible run
Standard already runs the full safety inspection and, on gas, a full combustion analysis. Premium is the hands-on cleaning Standard leaves in place, the extra readings and a photo report.
Burners pulled and cleaned (gas), smoke pipe and chimney base (oil), coil foam-clean or head wash (heat pump, mini-split) — on gas, the combustion analysis itself is in every Standard visit
Static pressure and blower motor amp draw on a furnace, on top of the combustion analysis Standard already takes on gas
Photos of the cleaning and of the analyzer reading, attached to your report
Don't risk your family's safety. Schedule your tune-up before winter.
Standard is the full tune-up with every required reading for your system — on gas and oil that includes carbon monoxide and combustion analysis. Premium adds real deep-clean work, extra readings and a photo report.
Work: Safety checks (CO, heat exchanger, switches, venting), gas leak test, ignition, flame sensor cleaned, burner area vacuumed, blower, electrical, condensate and controls.
Readings: Room and flue CO, combustion analysis, manifold pressure, temperature rise, return temperature.
Adds work: Burners removed, cleaned and reinstalled with joints leak-tested; on 90%+ furnaces the condensate trap and pressure-switch tubing cleaned; blower compartment vacuumed; high-voltage connections torqued.
Readings: Adds static pressure and blower amps, plus a photo report.
Work: Full oil burner cleaning: new nozzle, oil filter and strainer; electrodes set; burner head and fan cleaned; heat exchanger brushed and vacuumed; plus the safety and system checks.
Readings: Full combustion test with smoke number, draft, pump pressure, temperature rise.
Adds work: Smoke pipe taken down, brushed and resealed; barometric damper set; chimney-base cleanout; oil tank and lines checked; connections torqued.
Readings: Adds burner motor amps, static pressure and blower amps, plus a photo report.
Work: Safety; each heating element and sequencer energized and checked; blower, electrical, condensate and controls.
Readings: Amps per element stage, temperature rise.
Adds work: With power off, every element, sequencer and breaker lug torqued; blower compartment vacuumed.
Readings: Adds static pressure and blower amps, plus a photo report.
Every heating tune-up is completed on the same checklist our technicians fill out in the field — 46 checks at the Standard level, 53 with Premium cleaning, measurements and photos. These are the readings and results that end up on your record.
Findings may change the recommended work. Any added repairs are quoted and approved before we start.
Catch ignition problems before they leave you without heat.
Dirty sensors cause frequent shutdowns and poor performance.
Improper combustion wastes energy and creates safety risks.
Clogged filters and dirty blowers reduce heating efficiency.
Soot buildup causes inefficient heating and higher bills.
Early detection prevents complete motor failure.
Proper maintenance prevents dangerous overheating conditions.
Tune-ups restore efficiency and lower utility costs.
From call to comfort in 4 easy steps
We inspect critical components to ensure your furnace is safe to operate.
We remove dust, soot, and buildup, then calibrate components for efficient operation.
We verify that your furnace heats evenly and performs within manufacturer specifications.
You receive a full summary of your furnace's condition and any recommended repairs or upgrades.
Our team is EPA 608-certified, fully insured, and trained on all furnace types.
Comprehensive service, not a quick checklist.
No pressure sales - just professional advice on your system's needs.
Fast scheduling to get your furnace serviced quickly.
Choose the service level that's right for your home. No fees or surprise add-ons.
No fees. No surprises. Just honest service.
The full field checklist, safety inspection included
Everything in Standard plus a deep clean and extended readings
Bundle multiple systems for savings
Multi-system discounts available. Premium service recommended for furnaces 5+ years old.
We'll help you make the right decision for your home and budget
Financing options are available through Synchrony Bank, subject to credit approval and the lender's current terms. Review the full offer before applying.
Equipment capability is confirmed from the make, model, age, condition, and requested scope before scheduling.






Don't see your equipment listed? Call us (516) 259-1191 to confirm service capability for the make and model.
Lock in annual tune-ups, priority scheduling, and repair discounts — starting at just $11.99/month equivalent.
First year, billed up front as $143.88 · $299/year from Year 2
No contracts. Cancel anytime. Compare all Home+ plans →
Get answers to common questions about our services
Recent Google reviews
Recent public reviews from homeowners who hired Home+ Air & Heat.
Loading recent reviews…
Help other Nassau County homeowners by sharing your experience. It only takes a minute!
Currently 5 stars with 100 reviews
Choose a service area for local furnace tune up details
Our homeowners' top picks for heating, cooling & air quality
Financing On New System Installs
Limited-time 0% interest for 25 months on qualifying installations of $2,500+. No money down, no prepayment penalty. Subject to credit approval.
Furnace Installation
Save $500 on a new high-efficiency furnace installation with our 10-year labor warranty.
Home+ Air & Heat
55 Jericho Tpke, Suite 203
Jericho, NY 11753
Phone
(516) 259-1191Hours
Open 24 hours, 7 days a week
Serving Nassau & Western Suffolk