Heating Services · Long Island & NYC

    Furnace Repair Cost: 2025 Pricing Guide

    Transparent pricing for common furnace repairs in Nassau County. Know what to expect before you call.

    Call (516) 259-1191
    • 5.0 from 120+ Google reviews
    • Upfront pricing—no surprises
    • Based in Jericho

    Overview

    How Much Does Furnace Repair Cost?

    The average furnace repair in Nassau County costs between $150 and $500, with most repairs falling around $300. However, costs vary significantly based on what's wrong, your furnace type, and parts needed. Minor repairs like flame sensor cleaning or ignitor replacement are on the lower end, while major repairs like blower motor or control board replacement cost more. This guide provides honest, transparent pricing so you know what to expect before calling for service.

    Why Our Pricing Is Different

    • Upfront Quotes: Know the full cost before any work begins—no surprises on your invoice
    • Diagnostic Fee Waived: Our $199 diagnostic fee is applied to your repair cost when you proceed
    • Honest Recommendations: We'll tell you if replacement makes more sense than expensive repairs
    • Parts Transparency: We show you parts costs separately so you know what you're paying for
    • Repair Warranty: Repairs carry a 30- to 90-day repair warranty, depending on the repair

    What we see

    Common Furnace Repair Costs

    Ignitor Replacement: $150 - $300

    One of the most common repairs. Hot surface ignitors typically last 3-5 years. Parts cost $30-80, plus labor for safe replacement and testing.

    Flame Sensor: $100 - $250

    Dirty or failed flame sensors cause furnaces to shut down immediately after ignition. Often just needs cleaning ($100-150) rather than replacement.

    Blower Motor: $400 - $900

    Major repair involving motor replacement. Variable-speed motors cost more than standard single-speed. Includes motor, capacitor if needed, and labor.

    Control Board: $400 - $700

    The furnace's brain. Replacement requires matching the correct board to your model. Some boards are proprietary and cost more.

    Inducer Motor: $300 - $600

    Vents combustion gases. Replacement includes motor, gasket, and proper sealing to ensure safe venting.

    Gas Valve: $350 - $700

    Controls gas flow to burners. Replacement requires gas handling expertise and testing for safe operation.

    Heat Exchanger: $1,500 - $3,000

    Major repair—often replacement makes more sense. A cracked heat exchanger is a safety hazard requiring immediate attention.

    Thermocouple: $100 - $200

    For older furnaces with standing pilots. Relatively inexpensive safety component that controls pilot gas flow.

    Recent work

    Recent furnace jobs

    See all jobs
    The new draft inducer motor, mounted and wired on the furnace's inducer housing.Repair

    Roslyn, NY·Gas furnace

    Goodman Furnace Draft Inducer Motor Replacement in Roslyn

    See the job

    Carbon monoxide check at the furnace cabinet. The digital CO meter reads 0 PPM.Maintenance

    Lindenhurst, NY·Gas furnace

    Gas Furnace Safety Tune-Up in Lindenhurst

    See the job

    A gray Armstrong Air furnace unit is shown in a tight utility closet, with an EnergyGuide label visible on the front.Maintenance

    Deer Park, NY·Gas furnace

    Blower Motor Capacitor Replacement in Deer Park

    See the job

    Photos enhanced for clarity.

    What you get

    What's Included in Our Repair Pricing

    • Diagnostic fee ($199) waived with repair
    • Parts cost with retail pricing transparency
    • Labor for complete repair
    • Testing and safety verification
    • System cleanup after repair
    • 30- to 90-day repair warranty
    • No fees or surprise charges
    • Honest repair vs replacement advice

    How it goes

    Our Simple Process

    From call to comfort in 6 easy steps

    1. 01

      Diagnostic Visit ($199)

      Technician performs complete inspection to identify the problem. This fee is waived when you proceed with our recommended repair.

    2. 02

      Problem Identification

      We identify exactly what's wrong and why. No guessing, no replacing parts hoping to fix the issue.

    3. 03

      Written Estimate

      You receive a detailed estimate showing diagnostic findings, recommended repair, parts cost, labor cost, and total price.

    4. 04

      Repair vs Replace Analysis

      If repair costs exceed 50% of replacement cost on older equipment, we'll discuss whether replacement makes more financial sense.

    5. 05

      Your Decision

      You decide whether to proceed. No pressure, no surprise fees. The price quoted is the price you pay.

    6. 06

      Complete Repair

      We complete the repair, test the system thoroughly, and verify safe operation before leaving.

    Why Home+

    Why Choose Home+ Air for Furnace Repairs

    Transparent Pricing

    We believe in honest, upfront pricing. You'll never be surprised by fees or inflated invoices.

    Diagnostic Fee Waived

    Proceed with repairs and your $199 diagnostic fee is credited toward the repair cost.

    Honest Advice

    We'll tell you honestly when repair doesn't make financial sense. Your trust matters more than one repair.

    Quality Parts

    We use OEM and high-quality aftermarket parts with manufacturer warranties—not cheap knockoffs.

    Warranty Included

    Repairs carry a 30- to 90-day repair warranty, depending on the repair. Manufacturer parts warranties are separate.

    Pricing

    Transparent Pricing

    No fees. No surprises. Just honest service.

    Minor Repairs

    $100 - $300

    Simple fixes with inexpensive parts

    • Flame sensor cleaning: $100-150
    • Thermocouple replacement: $100-200
    • Ignitor replacement: $150-300
    • Pressure switch: $150-250
    • Capacitor replacement: $150-250
    • Filter replacement: Included with service

    Most Popular

    Moderate Repairs

    $300 - $600

    Common repairs requiring more time or costlier parts

    • Inducer motor: $300-600
    • Draft inducer: $350-550
    • Gas valve: $350-700
    • Limit switch: $150-350
    • Circuit board (basic): $400-600
    • Blower wheel: $250-400

    Major Repairs

    $600 - $1,500+

    Complex repairs—consider replacement if furnace is old

    • Blower motor: $400-900
    • Control board (advanced): $400-700
    • Heat exchanger: $1,500-3,000
    • Complete electrical overhaul: $800+
    • Multiple component failure: Varies
    • May approach replacement cost

    All prices include parts, labor, and warranty. Diagnostic fee ($199) waived with repair.

    Get Free Quote

    Flexible Financing Available

    Synchrony Bank

    Financing options are available through Synchrony Bank, subject to credit approval and the lender's current terms. Review the full offer before applying.

    Online application
    Terms shown before acceptance
    Subject to credit approval
    View All Options

    Save with Home+ Membership

    Starting at $11.99/mo, paid up front as $143.88 for Year 1: 2 annual tune-ups, 10% off all services, and priority scheduling.

    No long-term contractsCancel anytime after Year 1
    View Home+ Plans

    Own a Commercial Property?

    Business+ plans start at $935/year per rooftop unit (other equipment priced per unit in your quote), with 2 tune-ups/yr per unit, 10% off all services, and priority scheduling.

    No ContractsSatisfaction Guarantee
    View Business+ Plans

    Where we work

    Furnace Repair Cost Across Nassau County

    Choose a service area for local furnace repair cost details

    View Complete Service Area Coverage

    Common questions

    Frequently Asked Questions

    Get answers to common questions about our services

    How much does a typical furnace repair cost?+

    Most furnace repairs in Nassau County cost between $150 and $500, with the average around $300. Minor repairs like ignitors and sensors are $100-300, while major repairs like blower motors or control boards run $400-900.

    Is there a diagnostic fee?+

    Yes, our diagnostic fee is $199, which covers a complete inspection to identify the problem. This fee is waived when you proceed with our recommended repair—it's credited toward your repair cost.

    Do you charge extra for evenings and weekends?+

    After-hours pricing can vary by service and timing. Dispatch confirms the diagnostic charge and any after-hours terms before a technician is sent, and you approve the repair price before work starts.

    When is it better to replace instead of repair?+

    Consider replacement when: repair costs exceed 50% of replacement cost, your furnace is over 15-20 years old, you've had multiple repairs recently, the heat exchanger is cracked, or energy bills have increased significantly.

    Why do repair costs vary so much between companies?+

    Differences include: labor rates, parts quality (OEM vs cheap aftermarket), warranty terms, overhead costs, and profit margins. Some companies use low diagnostic fees as bait then inflate repair costs. We prefer honest, straightforward pricing.

    Do you provide written estimates before repair?+

    Yes, always. You'll receive a detailed written estimate showing the problem, recommended repair, parts cost, labor cost, and total price before any work begins. No surprises.

    Related

    Our homeowners' top picks for heating, cooling & air quality

    Looking for more furnace information?View Complete Furnace Guide

    Browse Other HVAC Services

    View All HVAC Services

    Need a Furnace Repair Estimate?

    Get honest, upfront pricing for your furnace repair. No surprises, no pressure. Same-day service available throughout Nassau County.

    Call (516) 259-1191
    Blake Ruwali, owner of Home+ Air and Heat

    Owner

    Blake Ruwali

    Blake runs Home+ from our office in Jericho.

    NYC DCWP Home Improvement Contractor Lic. #2138487-DCWP

    Love Our Service? Share Your Experience!Help other Nassau County homeowners by leaving a quick Google review. Your feedback helps us serve you better!Leave a Review5.0 stars • 120 reviews
    Call (516) 259-1191