
Dunkirk Royal CO (combi)
Model Number: 80-200 MBH
Royal CO is Dunkirk’s gas condensing combi boiler.
Technical Specifications
Source: manufacturer spec sheet · checked Sep 27, 2026
Prices depend on sizing, venting and piping in your home, so we quote every installation.
Sizing: the right size comes from a room-by-room heat-loss calculation, not the size of the old boiler or a rule of thumb. Oversized boilers short-cycle and waste fuel; steam systems are sized to the connected radiation instead. See how we approach boiler installation.
Home-Specific Operating Cost Review
No guaranteed annual savings or payback period
Historical Use
Fuel consumption and weather
Current Rates
Utility and delivered-fuel prices
System Design
Load, piping, controls, and temperatures
Full Specifications
- Model Number
- 80-200 MBH
- Efficiency (AFUE)
- 95.2%
- Boiler Type
- Combi Boiler
- Fuel
- natural gas/propane
- Venting
- direct vent
- BTU Input Range
- 80k - 200k BTU
- Domestic Hot Water
- yes
- In Production
- Yes
- Parts Warranty
- 5 years
- Heat Exchanger Warranty
- 10 years
Specifications sourced from the manufacturer spec sheet, checked Sep 27, 2026.
Ideal For
Homes needing hydronic heat and on-demand domestic hot water
Expert Review: Dunkirk Royal CO (combi)
Royal CO is Dunkirk’s gas condensing combi boiler.
Its residential specification describes a stainless parallel-tube boiler exchanger, brazed-plate domestic-hot-water exchanger and three-way DHW-priority valve. Limited residential coverage is ten years exchanger and five years parts. Listed input range: 80–200 MBH input. Rated efficiency on file: 95.2% (confirm the rating method for the exact size on the spec sheet). Venting on file: direct vent. Produces domestic hot water directly.
It is best suited to homes needing hydronic heat and on-demand domestic hot water. Before ordering, a contractor should complete a room-by-room heat-loss calculation, check the distribution system's water temperatures and confirm venting and clearances against the installation manual.
Pros: Condensing design captures heat from flue gases when return water is cool enough. Modulating burners can match output more closely to mild-weather loads. Heating and domestic hot water in one wall-hung appliance, freeing floor space. Multiple sizes (80–200 MBH input) allow sizing to a calculated heat loss. Considerations: Select by both building heat loss and simultaneous fixture demand. Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings. Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials.
Specifications on this page come from the manufacturer documents linked below; always confirm figures for the exact size being installed.
Key Features & Technology
Its residential specification describes a stainless parallel-tube boiler exchanger, brazed-plate domestic-hot-water exchanger and three-way DHW-priority valve. Limited residential coverage is ten years exchanger and five years parts.
Listed input range: 80–200 MBH input.
Rated efficiency on file: 95.2% (confirm the rating method for the exact size on the spec sheet).
Venting on file: direct vent.
Produces domestic hot water directly.
Advantages
- Condensing design captures heat from flue gases when return water is cool enough.
- Modulating burners can match output more closely to mild-weather loads.
- Heating and domestic hot water in one wall-hung appliance, freeing floor space.
- Multiple sizes (80–200 MBH input) allow sizing to a calculated heat loss.
Considerations
- Select by both building heat loss and simultaneous fixture demand.
- Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings.
- Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials.
Sizing & Installation Notes
Combi boilers like the Royal CO (combi) are sized on two loads at once: the home's heat loss and the peak domestic hot water demand. In most Long Island homes the hot-water load is the larger one, so we size to your household's simultaneous shower and tap use.
Every Dunkirk installation starts with a free in-home assessment covering the heat-loss calculation, venting and chimney condition, and gas or oil supply sizing. Learn more about our boiler installation process, or see current rebate and incentive programs that may apply.
Warranty & Protection
Parts Warranty
5 years
Heat Exchanger
10 years
Our Guarantee
100% Satisfaction
All Dunkirk boiler installations by Home+ Air & Heat include our 1-year workmanship warranty, covering labor and any installation-related issues.
Compare the Dunkirk Lineup
| Model | Efficiency | BTU Range | Fuel | Heat Exchanger Warranty |
|---|---|---|---|---|
| Royal CO (combi) (this model) | 95.2% AFUE | 80k - 200k BTU | natural gas/propane | 10 years |
| Q95M | 95% AFUE | 80k - 200k BTU | natural gas/propane | 15-yr limited |
| DXL | 83.5% AFUE | Various sizes available | natural gas | — |
| WPSB Series 4 | 84.1% AFUE | 75k - 299k BTU | natural gas | 20-yr non-prorated |
| XEB Series 4 | 84.4% AFUE | 43k - 188k BTU | natural gas | 20-yr non-prorated |
| Royal HE | 95.2% AFUE | 80k - 200k BTU | natural gas/propane | 10 years |
| DXL-K | 84% AFUE | 59k - 235k BTU | natural gas | 20-yr non-prorated |
| PSB | 82.7% AFUE | 75k - 299k BTU | natural gas | 12-yr limited |
See the full Dunkirk brand page for lineup context, or browse the Best Combi Boilers 2027 guide to compare across brands.
Frequently Asked Questions
Ready for a Quote?
Get a free, no-obligation quote for Dunkirk Royal CO (combi) installation in Nassau County.
Compare Boiler Brands
See how Dunkirk compares to other top boiler manufacturers.
Similar Boiler Models to Compare
Other combi boilers with similar efficiency ratings from different brands.


