Share
    Back to Dunkirk Boilers
    Dunkirk logo
    Value

    Dunkirk Royal HE

    Model Number: 80-200 MBH

    Royal HE is a gas condensing heating-only boiler.

    95.2% AFUE
    Condensing Boiler
    80k - 200k BTU
    Program eligibility requires written confirmation
    (516) 259-1191

    Technical Specifications

    Efficiency (AFUE)95.2%
    Boiler TypeCondensing Boiler
    BTU Input Range80k - 200k BTU
    Fuelnatural gas/propane
    Ventingdirect vent
    Makes Domestic Hot Waterindirect-ready
    In ProductionYes
    Heat Exchanger Warranty10 years
    Installed Price

    Source: manufacturer spec sheet · checked Sep 27, 2026

    Prices depend on sizing, venting and piping in your home, so we quote every installation.

    Sizing: the right size comes from a room-by-room heat-loss calculation, not the size of the old boiler or a rule of thumb. Oversized boilers short-cycle and waste fuel; steam systems are sized to the connected radiation instead. See how we approach boiler installation.

    Home-Specific Operating Cost Review

    No guaranteed annual savings or payback period

    Historical Use

    Fuel consumption and weather

    Current Rates

    Utility and delivered-fuel prices

    System Design

    Load, piping, controls, and temperatures

    Get Your Custom Quote

    Full Specifications

    Model Number
    80-200 MBH
    Efficiency (AFUE)
    95.2%
    Boiler Type
    Condensing Boiler
    Fuel
    natural gas/propane
    Venting
    direct vent
    BTU Input Range
    80k - 200k BTU
    Domestic Hot Water
    indirect-ready
    In Production
    Yes
    Parts Warranty
    5 years
    Heat Exchanger Warranty
    10 years

    Specifications sourced from the manufacturer spec sheet, checked Sep 27, 2026.

    Ideal For

    Homes seeking condensing space heat with optional indirect hot water

    Expert Review: Dunkirk Royal HE

    Royal HE is a gas condensing heating-only boiler.

    Its specification describes an iron-chromium stainless parallel-tube exchanger and controls for an optional indirect tank. Limited residential coverage is ten years exchanger and five years parts. Listed input range: 80–200 MBH input. Rated efficiency on file: 95.2% (confirm the rating method for the exact size on the spec sheet). Venting on file: direct vent. Can supply domestic hot water through an indirect tank.

    It is best suited to homes seeking condensing space heat with optional indirect hot water. Before ordering, a contractor should complete a room-by-room heat-loss calculation, check the distribution system's water temperatures and confirm venting and clearances against the installation manual.

    Pros: Condensing design captures heat from flue gases when return water is cool enough. Modulating burners can match output more closely to mild-weather loads. Can be paired with an indirect water heater for high-volume hot water. Multiple sizes (80–200 MBH input) allow sizing to a calculated heat loss. Considerations: Hot water for taps requires separate equipment; commercial warranty differs. Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings. Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials.

    Specifications on this page come from the manufacturer documents linked below; always confirm figures for the exact size being installed.

    Key Features & Technology

    Its specification describes an iron-chromium stainless parallel-tube exchanger and controls for an optional indirect tank. Limited residential coverage is ten years exchanger and five years parts.

    Listed input range: 80–200 MBH input.

    Rated efficiency on file: 95.2% (confirm the rating method for the exact size on the spec sheet).

    Venting on file: direct vent.

    Can supply domestic hot water through an indirect tank.

    Advantages

    • Condensing design captures heat from flue gases when return water is cool enough.
    • Modulating burners can match output more closely to mild-weather loads.
    • Can be paired with an indirect water heater for high-volume hot water.
    • Multiple sizes (80–200 MBH input) allow sizing to a calculated heat loss.

    Considerations

    • Hot water for taps requires separate equipment; commercial warranty differs.
    • Condensing efficiency depends on low return-water temperatures; high-temperature radiation may limit real-world savings.
    • Requires a condensate drain and, in many homes, neutralization, plus manufacturer-approved vent materials.

    Sizing & Installation Notes

    Condensing boilers like the Royal HE reach their rated efficiency only when return water runs cool enough to condense flue gases. We check your radiation and design water temperatures so the unit actually condenses in your home, not just on the spec sheet.

    Every Dunkirk installation starts with a free in-home assessment covering the heat-loss calculation, venting and chimney condition, and gas or oil supply sizing. Learn more about our boiler installation process, or see current rebate and incentive programs that may apply.

    Warranty & Protection

    Parts Warranty

    5 years

    Heat Exchanger

    10 years

    Our Guarantee

    100% Satisfaction

    All Dunkirk boiler installations by Home+ Air & Heat include our 1-year workmanship warranty, covering labor and any installation-related issues.

    Compare the Dunkirk Lineup

    Model Efficiency BTU Range Fuel Heat Exchanger Warranty
    Royal HE (this model) 95.2% AFUE 80k - 200k BTU natural gas/propane 10 years
    Q95M 95% AFUE 80k - 200k BTU natural gas/propane 15-yr limited
    DXL 83.5% AFUE Various sizes available natural gas —
    WPSB Series 4 84.1% AFUE 75k - 299k BTU natural gas 20-yr non-prorated
    XEB Series 4 84.4% AFUE 43k - 188k BTU natural gas 20-yr non-prorated
    DXL-K 84% AFUE 59k - 235k BTU natural gas 20-yr non-prorated
    Royal CO (combi) 95.2% AFUE 80k - 200k BTU natural gas/propane 10 years
    PSB 82.7% AFUE 75k - 299k BTU natural gas 12-yr limited

    See the full Dunkirk brand page for lineup context, or browse the Best Condensing Boilers guide to compare across brands.

    Frequently Asked Questions

    Ready for a Quote?

    Get a free, no-obligation quote for Dunkirk Royal HE installation in Nassau County.

    (516) 259-1191

    More Dunkirk Boilers

    Explore other boiler models from Dunkirk.

    View All Dunkirk Boilers

    Compare Boiler Brands

    See how Dunkirk compares to other top boiler manufacturers.

    Compare Alternatives

    Similar Boiler Models to Compare

    Other condensing boilers with similar efficiency ratings from different brands.

    Condensing
    AFUE
    Not verified
    Tier
    mid-range
    View Details
    Condensing
    High Eff.
    AFUE
    96.2%
    Tier
    mid-range
    View Details
    Condensing
    High Eff.
    AFUE
    96.1%
    Tier
    mid-range
    View Details
    Condensing
    High Eff.
    AFUE
    96%
    Tier
    flagship
    View Details