
Slant/Fin Bobcat B-120A/200A
Model Number: B-120A/200A
A wall-hung aluminum condensing gas boiler rated 93% AFUE, in 30,000–120,000 and 50,000–200,000 BTU/hr sizes with direct PVC venting.
Technical Specifications
Source: manufacturer spec sheet · checked Sep 27, 2026
Prices depend on sizing, venting and piping in your home, so we quote every installation.
Sizing: the right size comes from a room-by-room heat-loss calculation, not the size of the old boiler or a rule of thumb. Oversized boilers short-cycle and waste fuel; steam systems are sized to the connected radiation instead. See how we approach boiler installation.
Home-Specific Operating Cost Review
No guaranteed annual savings or payback period
Historical Use
Fuel consumption and weather
Current Rates
Utility and delivered-fuel prices
System Design
Load, piping, controls, and temperatures
Full Specifications
- Model Number
- B-120A/200A
- Efficiency (AFUE)
- 93%
- Boiler Type
- Condensing Boiler
- Fuel
- natural gas/propane
- Venting
- direct vent (PVC/CPVC/stainless)
- BTU Input Range
- 30k - 200k BTU
- Domestic Hot Water
- indirect-ready
- In Production
- Yes
- Parts Warranty
- 1-year
- Heat Exchanger Warranty
- 12-year residential (5-yr full + 7-yr prorated)
Specifications sourced from the manufacturer spec sheet, checked Sep 27, 2026.
Ideal For
Homes replacing a chimney-vented gas boiler that want condensing efficiency in a small wall-mounted unit.
Expert Review: Slant/Fin Bobcat B-120A/200A
The Slant/Fin Bobcat is a wall-hung, modulating condensing gas boiler built around an aluminum heat exchanger. The two sizes cover 30,000–120,000 BTU/hr (B-120A) and 50,000–200,000 BTU/hr (B-200A), and Slant/Fin rates the line at 93% AFUE. It burns natural gas or propane, vents direct through PVC, CPVC or stainless pipe, and connects to an indirect tank for domestic hot water. Slant/Fin's residential warranty gives the heat exchanger five years of full coverage plus seven prorated, and one year on parts. Bobcat is an older platform, so check parts availability with your installer before you choose it.
Key Features & Technology
Modulating condensing burner
Aluminum heat exchanger
93% AFUE
Two sizes: 30k–120k and 50k–200k BTU/hr
Direct vent in PVC, CPVC or stainless
Indirect water heater ready
Advantages
- Wide turndown on each size suits low winter loads
- Compact wall-hung footprint
- Plastic venting avoids chimney work
Considerations
- Aluminum heat exchangers need careful water chemistry
- Heat exchanger coverage becomes prorated after year five
- Older platform, so confirm parts support locally
Sizing & Installation Notes
Condensing boilers like the Bobcat B-120A/200A reach their rated efficiency only when return water runs cool enough to condense flue gases. We check your radiation and design water temperatures so the unit actually condenses in your home, not just on the spec sheet.
Every Slant/Fin installation starts with a free in-home assessment covering the heat-loss calculation, venting and chimney condition, and gas or oil supply sizing. Learn more about our boiler installation process, or see current rebate and incentive programs that may apply.
Warranty & Protection
Parts Warranty
1-year
Heat Exchanger
12-year residential (5-yr full + 7-yr prorated)
Our Guarantee
100% Satisfaction
All Slant/Fin boiler installations by Home+ Air & Heat include our 1-year workmanship warranty, covering labor and any installation-related issues.
Compare the Slant/Fin Lineup
| Model | Efficiency | BTU Range | Fuel | Heat Exchanger Warranty |
|---|---|---|---|---|
| Bobcat B-120A/200A (this model) | 93% AFUE | 30k - 200k BTU | natural gas/propane | 12-year residential (5-yr full + 7-yr prorated) |
| Galaxy GXHA | 81.3% AFUE | 100k - 200k BTU | natural gas/propane | 10-year limited (steam) |
| Lynx | 95% AFUE | 25k - 150k BTU | natural gas/propane | 15 years |
| Sentinel | 82.3% AFUE | 70k - 210k BTU | natural gas/propane | lifetime limited |
| Intrepid Direct Vent | 87% AFUE | 103k - 132k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| CHS-85-399 | 95% AFUE | 17k - 399k BTU | natural gas/propane | 15-year residential limited (includes 5-year Protection Plan) |
| Galaxy GX/GXH/GXHA | 81.3% AFUE | 100k - 300k BTU | natural gas/propane | 10-year limited (steam) |
| Intrepid Hot Water | 86% AFUE | 89k - 358k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Intrepid (steam) | 86% AFUE | 105k - 469k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Intrepid (water) | 86% AFUE | 105k - 245k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Victory VSPH | 86.1% AFUE | 60k - 180k BTU | natural gas/propane | lifetime limited |
| Jaguar J-390C | 90.2% AFUE | 390k - 390k BTU | natural gas | — |
| Monitron | Not verified | 27k - 137k BTU | electric | — |
| Sentry S-34-210 | 84.4% AFUE | 34k - 210k BTU | natural gas/propane | lifetime limited (verify on certificate) |
| VSL-160C | 92% AFUE | 30k - 160k BTU | natural gas/propane | 15-year residential limited (VSL warranty) |
| Galaxy GG | 84% AFUE | 95k - 399k BTU | natural gas/propane | lifetime limited (hot water models) |
| VSL II | 92% AFUE | 90k - 250k BTU | natural gas/propane | 15-year residential limited (VSL warranty) |
| Lynx LX-85-150 | 95% AFUE | 25k - 150k BTU | natural gas/propane | 15-year residential limited (includes 5-year Protection Plan) |
See the full Slant/Fin brand page for lineup context, or browse the Best Condensing Boilers guide to compare across brands.
Frequently Asked Questions
Ready for a Quote?
Get a free, no-obligation quote for Slant/Fin Bobcat B-120A/200A installation in Nassau County.
Compare Boiler Brands
See how Slant/Fin compares to other top boiler manufacturers.
Similar Boiler Models to Compare
Other condensing boilers with similar efficiency ratings from different brands.



