
Slant/Fin CHS-85-399
Model Number: CHS-85-399
A stainless fire-tube condensing gas boiler, CHS-85 to CHS-399, modulating across about 17,000–399,000 BTU/hr with a 15-year residential warranty.
Technical Specifications
Source: manufacturer spec sheet · checked Sep 27, 2026
Prices depend on sizing, venting and piping in your home, so we quote every installation.
Sizing: the right size comes from a room-by-room heat-loss calculation, not the size of the old boiler or a rule of thumb. Oversized boilers short-cycle and waste fuel; steam systems are sized to the connected radiation instead. See how we approach boiler installation.
Home-Specific Operating Cost Review
No guaranteed annual savings or payback period
Historical Use
Fuel consumption and weather
Current Rates
Utility and delivered-fuel prices
System Design
Load, piping, controls, and temperatures
Full Specifications
- Model Number
- CHS-85-399
- Efficiency (AFUE)
- 95%
- Boiler Type
- Condensing Boiler
- Fuel
- natural gas/propane
- Venting
- direct vent (sealed combustion)
- BTU Input Range
- 17k - 399k BTU
- Domestic Hot Water
- indirect-ready
- In Production
- Yes
- Parts Warranty
- covered under 5-year Protection Plan
- Heat Exchanger Warranty
- 15-year residential limited (includes 5-year Protection Plan)
Specifications sourced from the manufacturer spec sheet, checked Sep 27, 2026.
Ideal For
Homes and small buildings that want a stainless condensing boiler sized from a Manual J or heat-loss calculation.
Expert Review: Slant/Fin CHS-85-399
The Slant/Fin CHS is a stainless-steel fire-tube condensing gas boiler. Its sizes run from the CHS-85 up to the CHS-399, so the line spans roughly 17,000 to 399,000 BTU/hr of modulating input, from small homes to large residences and light commercial buildings. It burns natural gas or propane with sealed-combustion direct venting and pairs with an indirect tank for hot water. Slant/Fin's high-efficiency warranty gives residential installs 15 years of limited heat-exchanger coverage, including a five-year Protection Plan. Slant/Fin's library also carries a CPSC recall notice for CHS units, so have your installer check the serial number on any existing unit.
Key Features & Technology
Stainless-steel fire-tube heat exchanger
Modulating condensing burner
Sizes from CHS-85 to CHS-399
Sealed-combustion direct vent
Natural gas or propane
Indirect water heater ready
Advantages
- Very broad size range in one family
- Stainless heat exchanger
- 15-year residential heat exchanger warranty
Considerations
- CPSC recall notice on file, so check existing serial numbers
- Condensate drain and neutralizer required
- Largest sizes are beyond most single-family loads
Sizing & Installation Notes
Condensing boilers like the CHS-85-399 reach their rated efficiency only when return water runs cool enough to condense flue gases. We check your radiation and design water temperatures so the unit actually condenses in your home, not just on the spec sheet.
Every Slant/Fin installation starts with a free in-home assessment covering the heat-loss calculation, venting and chimney condition, and gas or oil supply sizing. Learn more about our boiler installation process, or see current rebate and incentive programs that may apply.
Warranty & Protection
Parts Warranty
covered under 5-year Protection Plan
Heat Exchanger
15-year residential limited (includes 5-year Protection Plan)
Our Guarantee
100% Satisfaction
All Slant/Fin boiler installations by Home+ Air & Heat include our 1-year workmanship warranty, covering labor and any installation-related issues.
Compare the Slant/Fin Lineup
| Model | Efficiency | BTU Range | Fuel | Heat Exchanger Warranty |
|---|---|---|---|---|
| CHS-85-399 (this model) | 95% AFUE | 17k - 399k BTU | natural gas/propane | 15-year residential limited (includes 5-year Protection Plan) |
| Galaxy GXHA | 81.3% AFUE | 100k - 200k BTU | natural gas/propane | 10-year limited (steam) |
| Lynx | 95% AFUE | 25k - 150k BTU | natural gas/propane | 15 years |
| Sentinel | 82.3% AFUE | 70k - 210k BTU | natural gas/propane | lifetime limited |
| Intrepid Direct Vent | 87% AFUE | 103k - 132k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Bobcat B-120A/200A | 93% AFUE | 30k - 200k BTU | natural gas/propane | 12-year residential (5-yr full + 7-yr prorated) |
| Galaxy GX/GXH/GXHA | 81.3% AFUE | 100k - 300k BTU | natural gas/propane | 10-year limited (steam) |
| Intrepid Hot Water | 86% AFUE | 89k - 358k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Intrepid (steam) | 86% AFUE | 105k - 469k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Intrepid (water) | 86% AFUE | 105k - 245k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Victory VSPH | 86.1% AFUE | 60k - 180k BTU | natural gas/propane | lifetime limited |
| Jaguar J-390C | 90.2% AFUE | 390k - 390k BTU | natural gas | — |
| Monitron | Not verified | 27k - 137k BTU | electric | — |
| Sentry S-34-210 | 84.4% AFUE | 34k - 210k BTU | natural gas/propane | lifetime limited (verify on certificate) |
| VSL-160C | 92% AFUE | 30k - 160k BTU | natural gas/propane | 15-year residential limited (VSL warranty) |
| Galaxy GG | 84% AFUE | 95k - 399k BTU | natural gas/propane | lifetime limited (hot water models) |
| VSL II | 92% AFUE | 90k - 250k BTU | natural gas/propane | 15-year residential limited (VSL warranty) |
| Lynx LX-85-150 | 95% AFUE | 25k - 150k BTU | natural gas/propane | 15-year residential limited (includes 5-year Protection Plan) |
See the full Slant/Fin brand page for lineup context, or browse the Best Condensing Boilers guide to compare across brands.
Frequently Asked Questions
Ready for a Quote?
Get a free, no-obligation quote for Slant/Fin CHS-85-399 installation in Nassau County.
Compare Boiler Brands
See how Slant/Fin compares to other top boiler manufacturers.
Similar Boiler Models to Compare
Other condensing boilers with similar efficiency ratings from different brands.


