
Slant/Fin Sentry S-34-210
Model Number: S-34-210
A cast-iron gas hot water boiler up to 84.4% AFUE; S models cover 34,000–150,000 BTU/hr, and the SX sizes up to 210,000 are discontinued.
Technical Specifications
Source: manufacturer spec sheet · checked Sep 27, 2026
Prices depend on sizing, venting and piping in your home, so we quote every installation.
Sizing: the right size comes from a room-by-room heat-loss calculation, not the size of the old boiler or a rule of thumb. Oversized boilers short-cycle and waste fuel; steam systems are sized to the connected radiation instead. See how we approach boiler installation.
Home-Specific Operating Cost Review
No guaranteed annual savings or payback period
Historical Use
Fuel consumption and weather
Current Rates
Utility and delivered-fuel prices
System Design
Load, piping, controls, and temperatures
Full Specifications
- Model Number
- S-34-210
- Efficiency (AFUE)
- 84.4%
- Boiler Type
- Hot Water Boiler
- Fuel
- natural gas/propane
- Venting
- chimney
- BTU Input Range
- 34k - 210k BTU
- Domestic Hot Water
- indirect-ready
- In Production
- Yes
- Parts Warranty
- 1 year
- Heat Exchanger Warranty
- lifetime limited (verify on certificate)
Specifications sourced from the manufacturer spec sheet, checked Sep 27, 2026.
Ideal For
Smaller gas hot water homes replacing a chimney-vented boiler.
Expert Review: Slant/Fin Sentry S-34-210
The Slant/Fin Sentry is a conventional cast-iron gas hot water boiler with chimney venting. The S models cover 34,000 to 150,000 BTU/hr, and the older SX models extended the line to 210,000 BTU/hr, but Slant/Fin's own ratings chart marks SX-150, SX-180 and SX-210 as discontinued. Slant/Fin rates Sentry at up to 84.4% AFUE, and it runs on natural gas or propane. This listing overlaps the main Sentry page.
Key Features & Technology
Cast-iron hot water sections
Up to 84.4% AFUE
S models 34,000–150,000 BTU/hr
Chimney vented
Natural gas or propane
Advantages
- Small sizes suit low-load homes
- Higher efficiency than many cast-iron gas boilers
Considerations
- SX 150–210 sizes discontinued
- Chimney required
- Not condensing
Sizing & Installation Notes
Hot water boilers like the Sentry S-34-210 are sized from a room-by-room heat-loss calculation. We never match the old boiler's size — oversized units short-cycle, waste fuel and wear out years early.
Every Slant/Fin installation starts with a free in-home assessment covering the heat-loss calculation, venting and chimney condition, and gas or oil supply sizing. Learn more about our boiler installation process, or see current rebate and incentive programs that may apply.
Warranty & Protection
Parts Warranty
1 year
Heat Exchanger
lifetime limited (verify on certificate)
Our Guarantee
100% Satisfaction
All Slant/Fin boiler installations by Home+ Air & Heat include our 1-year workmanship warranty, covering labor and any installation-related issues.
Compare the Slant/Fin Lineup
| Model | Efficiency | BTU Range | Fuel | Heat Exchanger Warranty |
|---|---|---|---|---|
| Sentry S-34-210 (this model) | 84.4% AFUE | 34k - 210k BTU | natural gas/propane | lifetime limited (verify on certificate) |
| Galaxy GXHA | 81.3% AFUE | 100k - 200k BTU | natural gas/propane | 10-year limited (steam) |
| Lynx | 95% AFUE | 25k - 150k BTU | natural gas/propane | 15 years |
| Sentinel | 82.3% AFUE | 70k - 210k BTU | natural gas/propane | lifetime limited |
| Intrepid Direct Vent | 87% AFUE | 103k - 132k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Bobcat B-120A/200A | 93% AFUE | 30k - 200k BTU | natural gas/propane | 12-year residential (5-yr full + 7-yr prorated) |
| CHS-85-399 | 95% AFUE | 17k - 399k BTU | natural gas/propane | 15-year residential limited (includes 5-year Protection Plan) |
| Galaxy GX/GXH/GXHA | 81.3% AFUE | 100k - 300k BTU | natural gas/propane | 10-year limited (steam) |
| Intrepid Hot Water | 86% AFUE | 89k - 358k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Intrepid (steam) | 86% AFUE | 105k - 469k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Intrepid (water) | 86% AFUE | 105k - 245k BTU | #2 fuel oil | see Slant/Fin cast-iron boiler warranty |
| Victory VSPH | 86.1% AFUE | 60k - 180k BTU | natural gas/propane | lifetime limited |
| Jaguar J-390C | 90.2% AFUE | 390k - 390k BTU | natural gas | — |
| Monitron | Not verified | 27k - 137k BTU | electric | — |
| VSL-160C | 92% AFUE | 30k - 160k BTU | natural gas/propane | 15-year residential limited (VSL warranty) |
| Galaxy GG | 84% AFUE | 95k - 399k BTU | natural gas/propane | lifetime limited (hot water models) |
| VSL II | 92% AFUE | 90k - 250k BTU | natural gas/propane | 15-year residential limited (VSL warranty) |
| Lynx LX-85-150 | 95% AFUE | 25k - 150k BTU | natural gas/propane | 15-year residential limited (includes 5-year Protection Plan) |
See the full Slant/Fin brand page for lineup context, or browse the Best Hot Water Boilers 2027 guide to compare across brands.
Frequently Asked Questions
Ready for a Quote?
Get a free, no-obligation quote for Slant/Fin Sentry S-34-210 installation in Nassau County.
Compare Boiler Brands
See how Slant/Fin compares to other top boiler manufacturers.
Similar Boiler Models to Compare
Other hot water boilers with similar efficiency ratings from different brands.



