Heating Tune-Up Prices, System by System

Work: Safety checks (CO, heat exchanger, switches, venting), gas leak test, ignition, flame sensor cleaned, burner area vacuumed, blower, electrical, condensate and controls.

Readings: Room and flue CO, combustion analysis, manifold pressure, temperature rise, return temperature.

Adds work: Burners removed, cleaned and reinstalled with joints leak-tested; on 90%+ furnaces the condensate trap and pressure-switch tubing cleaned; blower compartment vacuumed; high-voltage connections torqued.

Readings: Adds static pressure and blower amps, plus a photo report.

Work: Full oil burner cleaning: new nozzle, oil filter and strainer; electrodes set; burner head and fan cleaned; heat exchanger brushed and vacuumed; plus the safety and system checks.

Readings: Full combustion test with smoke number, draft, pump pressure, temperature rise.

Adds work: Smoke pipe taken down, brushed and resealed; barometric damper set; chimney-base cleanout; oil tank and lines checked; connections torqued.

Readings: Adds burner motor amps, static pressure and blower amps, plus a photo report.

Work: Safety; each heating element and sequencer energized and checked; blower, electrical, condensate and controls.

Readings: Amps per element stage, temperature rise.

Adds work: With power off, every element, sequencer and breaker lug torqued; blower compartment vacuumed.

Readings: Adds static pressure and blower amps, plus a photo report.

Work: Safety; gas leak test; ignition; burner area vacuumed; the full water side (pressure, expansion tank, relief valve, low-water cutoff, aquastat, zones, vents, fill); air bled; water pH and inhibitor tested; on condensing boilers the trap and neutralizer checked.

Readings: CO, combustion analysis, manifold pressure, supply and return temperatures.

Adds work: Cast iron: burners pulled and cleaned, flue passages brushed and vacuumed, resealed. Condensing: trap removed and cleaned, electrodes cleaned. Connections torqued.

Readings: Same readings as Standard, plus a photo report.

Work: Full oil burner cleaning: new nozzle, oil filter and strainer; electrodes set; burner head and fan cleaned; plus the full hot-water side and the water pH test.

Readings: Full combustion test with smoke number, pump pressure, supply and return temperatures.

Adds work: Smoke pipe taken down, brushed and resealed; barometric damper set; chimney-base cleanout; oil tank and lines checked; connections torqued.

Readings: Adds burner motor amps, plus a photo report.

Work: Safety; gas; ignition; burner area vacuumed; the steam side: water level, gauge glass cleaned, low-water cutoff flushed and tested, pressuretrol, pigtail, safety valve, Hartford loop.

Readings: CO, combustion analysis, manifold pressure, operating pressure.

Adds work: Burners pulled and cleaned; flue passages brushed and vacuumed; pigtail and gauge glass cleaned; main air vents checked; connections torqued.

Readings: Same readings as Standard, plus a photo report.

Work: Full oil burner cleaning: new nozzle, oil filter and strainer; electrodes set; burner head and fan cleaned; plus the full steam side.

Readings: Full combustion test with smoke number, operating pressure.

Adds work: Smoke pipe taken down, brushed and resealed; barometric damper set; chimney-base cleanout; oil tank and lines checked; connections torqued; plus pigtail, gauge glass and main vents.

Readings: Adds burner motor amps, plus a photo report.

Work: Reversing valve, forced defrost test, defrost sensor, base-pan drains and heater, line set, aux heat checked stage by stage; outdoor coil rinsed if dirty; blower, electrical, condensate.

Readings: Heating temperature split; charge assessment (gauges only if the split is off).

Adds work: Outdoor coil foam-cleaned and rinsed; indoor coil inspected and drain pan treated; connections torqued.

Readings: Adds pressures, superheat and subcooling; compressor, aux and blower amps; static pressure; plus a photo report.

Work: Filter screens washed; coil and blower fan checked and wiped; drain and pump tested; outdoor unit defrost, coil, base pan and line set.

Readings: Temperature split at each head; charge assessment.

Adds work: Each head washed in place under a bib (coil, barrel fan, drain pan); drain flushed; anti-microbial treatment; outdoor coil washed; connections torqued.

Readings: Adds pressures, superheat and subcooling; compressor and fan amps; plus a photo report.